Swiss Timing The AVK group has become a member of IAKS
Send inquiry to project-manager


Malmsten (Sweden) - a manufacturer of equipment for water polo and swimming. Official Partner of FINA and LEN.

Field for Water Polo certificated by FINA

Field for Water Polo certificated by FINA

Made in: EU

Model: 14042

Category: Equipment for water polo

Technicals Features:
The Competitor Water Polo Fields of Play are made according to FINA and LEN rules. They may be made for men, women, master or any custom sized field. A performing field for players and audience. Competitor Water Polo Fields are complete with tension springs and take up reels. The goal lanes attach directly to the hooks on the goals. The lanes of the Water Polo field are fitted to the wall or floor anchors (not included)

Our fields are constructed with the wave—damping effects of the Competitor patented flow—through design, which controls water turbulence by allowing wave energy to be dispersed along the length of the wave. Each field consists of a series of 100 mm polyethylene discs and donuts strung o a stainless steel cable. Each discs is designed to rotate independently of the others. This allows the wave energy to be absorbed and dispersed within the lane. This wave reduction optimises pool conditions for training and competition.

According to FINA rules the distance between the respective goal lines shall be 30 metres for games played by men and 25 metres for games played by women. The width of the field of play shall be 20 metres. For masters the distance shall be 23.5 metres minimum between the respective goal lines and the uniform width shall be 17 metres minimum.

Add to your inquiry to the project manager
Backstroke Rope

Backstroke Rope

Made in: EU

Model: 1816001

Category: Equipment for swimming pools

Technicals Features:
Backstroke turns indicator on a nylon cord with altering 3 flags per meter rope. Available in colour combinations blue/yellow, blue/white/red and red/blue.

Backstroke turns indicator on a nylon cord with 3 altering flags per meter. Available in different color combinations. Sold by meter rope. Always add an additional meter to needed length.

Add to your inquiry to the project manager
Ball holder - for goal judger

Ball holder - for goal judger

Made in: EU

Model: 1514009

Category: Equipment for water polo

Technicals Features:
Ball holder to be placed on water polo referee´s catwalk.

Material: Polycarbonate. Measurements: 0,65 x 0,24 x 0,75 m.

Add to your inquiry to the project manager
Ball release

Ball release

Made in: EU

Model: 1514007

Category: Equipment for water polo

Technicals Features:
The ball release is used for the start of play of water polo matches. Retained on the half distance line, the ball is put into play when the ball release is submerged by pulling the rope from the side of the pool, allowing for fair and accurate starts every time. Manufactured from EVA foam, high density plastic and stainless steel, it is designed to hold both men and women water polo balls. In order to use this release system, two eyebolts need to be installed at the bottom of the pool.

Materials: EVA foam, high density plastic and stainless steel.

Add to your inquiry to the project manager
Beach - Junior Water Polo Goal, made according to FINA standards

Beach - Junior Water Polo Goal, made according to FINA standards

Made in: EU

Model: 1511004

Category: Equipment for water polo

Technicals Features:
Beach/Junior Water Polo Goal made according to FINA rules. It's a free—floating model with reliable frame construction made of aluminum profiles, powder painted white and with a floating white support. The width of the support ensures a stable well afloat goal. Main features: It arrives almost ready to use, as easy as 1—2—3! It is foldable for ease of storage and transport. It is provided with a possibility for adjusting water level position. Comes equipped with castors for ease of transport and handling.

Water polo goal, free—floating. Width 3 m. Height: 90 cm. Depth: 158,6 cm. Material: Aluminum. Measurements of frame: 75 x 40 mm. Nets included. Sold by unit. Freight info: 375 x 165 x 30 mm (Note the length of 375 mm!). 1,85m3. 65 kg per box with one unit.

Add to your inquiry to the project manager
Competitor Lane Slider

Competitor Lane Slider

Made in: EU

Model: 1011021

Category: Equipment for swimming and water polo

Technicals Features:
Make you Competitor Racing Lane last longer! The Competitor Racing Lane runs smoothly over the Lane Slider and will therefore not be damaged from the hard edge of the pool. It also spares the pool edge from wear and tear and makes the taking—up a lot easier.

Size: 62 x 38 x 44 cm. Weight: 3,3 kg. Made of glassfiber reinforced vinylester.

Add to your inquiry to the project manager
Disconnector Competitor

Disconnector Competitor

Made in: EU

Model: 1011006

Category: Equipment for swimming pools

Technicals Features:
Competitor connector can be assembled on the wire of racing lanes for example to divide 50 m wire into two 25 m wires. This Connector can be placed according to demand onto the 50 m lane line when placing the order. According to international competition rules it's not possible to use one 50 m line divided in two 25 m lines during competition due to 15—m lanes marks.

Add to your inquiry to the project manager
Discs Competitor

Discs Competitor

Made in: EU

Model: 1011003

Category: Equipment for swimming pools

Technicals Features:
Each Racing Lane Line is assembled with certain pattern of discs, with a unique flow through technology, and floats in order to reduce water turbulence. Since 2009 this is the Official FINA Racing Lane Line — with a proven performance record — used at FINA competitions worldwide. Manufactured since 1974 and have already been in the pools of 8 Olympic Games and many World Championships.

Material: polythene. Sold per set of 2 pcs. Available in two sizes — 100 and 150 mm in diameter — the standard colors of red, yellow, white, blue, green and black. Other colors available upon special order. UV protected. Normally there is a donut (sold separately) in between each disc.

Add to your inquiry to the project manager
Donut Floats Competitor

Donut Floats Competitor

Made in: EU

Model: 1011004

Category: Equipment for swimming pools

Technicals Features:
Floats for Competitor racing lanes Standard and Gold, Ø 70 mm — same float used for all sizes. Available in standard colors red, white, blue, yellow, green and black — other colors can be manufactured upon customer request. All colors are UV protected.

Dimensions Ø 70 mm. Polyolefin with UV protection and color additives. Spare part — sold by piece.

Add to your inquiry to the project manager
False start device

False start device

Made in: EU

Model: 1816004

Category: Equipment for swimming pools

Technicals Features:
Easy to use false start mechanism. It has an inner diameter of 40 mm and comes equipped with a snap hook for affixing in post eyelet.

Made from stainless steel EN 1.4404 and fits our stainless steel post (sold separately). A soft covered nylon false start rope, with a leaded core, may be easily affixed (sold separately).

Add to your inquiry to the project manager
Equipment, approved by: