Article: 3481.931

Main unit dimensions: 376 x 215 x 245mm w/o Connectors

Microphone dimensions: 118 x 25 x 80 mm. + 7 meter cable

E-GUN dimensions 280 x 35 x 140 mm + 7 meter cable

Alarm “low battery”: Yes, 4 levels indicated as battery symbol (Empty, Low, Medium, Full)

Protection class: IP41

Power: Built in 12 Volt / 7 Ah Sealed lead-acid battery

Standby time: 24 Hours (1000 starts). After this, the unit should still be operable for 1 hour.

The self-discharge time is approximately 12 months if not in use.

An external 12V Lead/Acid battery (car battery) connected to the charger input, could be used if extended operation time is needed.

Charger: Max. initial current: 1.0 Ah (only for use in dry environment).

Speakers: Load 3.2 - 16 Ohms

Output speakers: @13.2 Volts, 3.2 Ohms, 1 kHz Typical: 2 * 13 Watt with < 10 % Distortion Maximum: 2 * 19 Watts with 10 % Distortion

Storage temperature: -20ºC to +65ºC

Working temperature: -10ºC to +65ºC

Relative humidity: (20%-80%) without condensation

Manufacturer Swiss Timing (Switzerland)

Article: 3142.902

Manufacturer: (Switzerland)

Category: Refereeing and timing systems for athletics

Specifications:

Weight : 6.5 kg

Battery life : 6 - 8 hours

Maximum range : 3000 m (prism)

250 m (reflective tape), 150 m (reflectorless)

Minimum range : 1.5 m

Accuracy : 2 mm

Measuring time : 1.5 s

Display: colored LCD

Interface language : selectable

Data connection : RS232 or optional Bluetooth

Operating temperature : -20 to 50°C (operating)

Storage temperature : -40 to 70°C (storage)

Humidity : 95% (non-condensing)

Sertifcates : IAAF Approved

Article: 3508.900

Manufacturer: Swiss Timing (Switzerland)

Category: Scoring and Timing systems

Specifications:

- For running disciplines used: false start detection system Mostrac with E-Gun, StartTime V, Starter headset with microphone, Three loudspeaker (with 10 m of cable for each), 8 MoSen in their charger case, 16 fixing clips to stick directly on starting Block, Power supply to recharge StartTime and MoSen

Article: 3474.915

Manufacturer: Swiss Timing (Switzerland)

Category: Refereeing and timing systems

Model:] MTE set of 15 wireless judge's keypad

Specifications:

Dimensions (excl. antenna): 220 x 115 x 95 mm

Weight (including battery): 480 g

Housing material : polyamide

Power supply: integrated battery. Battery autonomy: 12 hours @ 20°C

Display: 128 x 64 pixel, monochrome matrix LCD

Buzzer: yes, integrated

Wireless transmission protocol: ZigBee

Transmission range: 100 m (in open space)

Operating temperature: 0 to 50 °C

Certifications: FINA demand compliance

Article: 3435.904

Manufacturer: Swiss Timing (Switzerland)

Category: Scoring and Timing systems component

Model: MONTREAL

Specifications:

Dimensions : 920 x 750 x 200 mm

Weight : 15 kg

Digits height : Shot tme : 2x 40 cm (red LEDs)

Game tme : 4x 15 cm (white LEDs)

Power supply : 24 VDC (Power + Horn module)

Power consumption : 30 VA (max)

2x30m and 2x70m of cables on winder

Protection: IP54

Controls by OMEGA CALYPSO Waterpolo controller

Certifications: FINA demand compliance

Article: 3403.951.CA

Manufacturer: Swiss Timing (Switzerland)

Category: Scoring and Timing systems component

Model: Shot clock Omega Calypso

Specifications:

Dimensions : 50 x 35 x 53 cm

Weight : 5.8 kg

Digits height : 24 cm

Power supply : 24 VDC (Power + Horn module)

Power consumption : 30 VA (max)

Operating temperature : -10 to +50°C

Storage temperature : -20 to +80°C

3403.950.CA - Kit of 2 Shot clocks

3403.951.CA - Kit of 4 Shot clocks

Article: 3403.900

Manufacturer: Swiss Timing (Switzerland)

Category: Part of refereeing and timing systems

Specifications:

Using as main unit which controls scoreboard and time for water polo.

User friendly controls. Support for updates, compliance with changing rules and regulations.

Dimensions / Weight: 285x210x84mm/ 1.5 kg Certifications: FINA demand compliance

Article: 3402.921

Manufacturer: Swiss Timing

Model: PICCOLO Scoreboard

Category: Part of Refereeing and timing systems for swimming and water polo

Specifications:

Dimensions : 1660 x 1150 x 90 mm

Housing : aluminium

Display: 8 /10 lines of 8 digits, 10 cm high digits, white LEDs

Visibility distance : 50 m

Horizontal viewing angle : 140°

Power supply : 115-230 VAC, 50-60 Hz

Power consumption : 100 VA (maximum) 30 VA (typical)

Data communication : RS422 (or 20 mA current loop internal

connection)

Operating temperature : 0 to 70°C

Storage temperature -30 to 85°C

Article: STB3

Manufacturer: Swiss Timing (Switzerland)

Category: Refereeing and timing systems

SYSTEM COMPONENTS:

■ Shot clock display

■ Timing console

■ Shot clock remote controller (Start/Stop/

Reset)

■ Cables & universal power supply (100-240V)

Fully synchronized with the FIBA tming & scoring entry system

Sertifcates : FIBA Approved

Article: 3510.934

Dimensions: 716 x 1023 mm

Weight: 22kg

Power supply: 110-240 VAC

Horn: build in shot clock buzzer

Digits: 30cm LED (red) and 13.5cm LED (red) for tenth of seconds and 16 cm LED (amber) for game clock.

Approved by FIBA for competitions level 1&2

Manufacturer Swiss Timing (Switzerland)