Swiss Timing The AVK group has become a member of IAKS
Send inquiry to project-manager

Sports equipment for beach soccer at sites for beach sports


Beach soccer goals

Beach soccer goals

Article: beach—soccer—goals


Made in: EU

Model: S05020

Category: Equipment for beach sports

Technicals Features:
Pair of yellow colour aluminium beach soccer goals, round section 80 mm, dimensions 550x220 cm

Beach soccer goals, 5.50x2.20 m

Beach soccer goals, 5.50x2.20 m

Article: beach—soccer—goals—550x220—m


Made in: EU

Model: 180

Category: Equipment for beach soccer

Technicals Features:
These goals are equipped with the special profiles 120 /100 mm of the soccer goals and a yellow powder coating. They correspond to the construction of the goals “For insertion into ground sockets”. The only differences are the goal size and the special ground sockets.
The ground sockets are simply dug in the sand.
We recommend to load the net with chains in the ground area.

Standard equipment: Yellow powder coated finish. Incl. net hoops and net hoop braces of aluminium tube, diameter 30 mm, Safety system net holders and special ground sockets – insertion depths 300 mm – with covers.

Stadium backrest shell seats CR4 certificated by FIBA, UEFA /FIFA

Stadium backrest shell seats CR4 certificated by FIBA, UEFA /FIFA

Article: stadium—backrest—shell—seats—cr4—certificated—by—fiba—uefa—fifa


Made in: EU

Model: CR4

Category: Tribune, seats

Technicals Features:
With high backrest, follows the UEFA /FIFA recommendations, for any kind of grandstands.

Seat moulded by injection in stabilized high quality copolymer polypropylene. Shiny surface. Sealed around their entire perimeter to prevent dirt from accumulating inside the seats, and in turn making it easy to clean. Counts with central drainage.

Stadium tip up seats AB certificated by FIBA

Stadium tip up seats AB certificated by FIBA

Article: stadium—tip—up—seats—ab—certificated—by—fiba


Made in: EU

Model: AB

Category: Tribune, seats

Technicals Features:
Tip up seat, designed for all kinds of usage (conventional bleachers, metallic and retractable bleachers, benches, etc, for sport facilities, VIP boxes, buildings that stage public shows, amphitheatres, auditoriums, etc.).

The seat tips up either by counterweight or by spring action, through the optional track limitator.
Reinforcement beams in the swinging conjoint are manufactured by the injection of a material formed of polymeric matrix reinforced with fibreglass, which brings resistance and comfort to the end product.

Chasis in steel profiles cold laminated S275, hot galvanised or cataphoretic coating, optional, oven painted.

Flooring tiles Solkit

Flooring tiles Solkit

Article: flooring—tiles—solkit


Made in: EU

Model: Solkit

Category: Equipment for locker rooms, floorings

Technicals Features:
Meticulously produced using high—density virgin polyethylene, this top quality material allows us to offer a 10—year warranty under normal usage conditions. We offer two different options —either high—density PE (more rigid) or low—density PE (more flexible)— and a wide range of colours to address a host of different needs.

Dimensions: 50 x 50 x 2 cm.

Weight: 1.10 kg per tile

Metallic bleachers (benches) for sports T-FLEX

Metallic bleachers (benches) for sports T-FLEX

Article: metallic—bleachers—benches—for—sports—t—flex


Made in: EU

Model: T—FLEX

Category: Tribune, seats

Technicals Features:
Bleacher recommended for multipurpose installations that require an economical solution to increase the capacity in different courts, depending on the event. The modules can be moved easy and quickly using the wheels incorporated at the back side. It is only needed to lift the module and move it.

Metallic structure (frame, pillars, and trussers) made of steel profiles cold laminated S275, hot
galvanised at 450 ºC. Optional: cataphoresis plus epoxy paint treatment.

Platforms and stairs: 12mm thick board. 100% birch plywood with phenolic film slip, weatherproof material. Color black or dark brown finish.

Metallic bleachers (benches) for sports TM85-40

Metallic bleachers (benches) for sports TM85-40

Article: metallic—bleachers—benches—for—sports—tm85—40


Made in: EU

Model: TM85—40

Category: Tribune, seats

Technicals Features:
Dismountable metallic bleacher, recommended for permanent installations outdoor or indoor. Represents an alternative to a concrete bleacher, can be supplied with risers and closed sides, giving complete security, without gaps.

Allows to install any shell seat model, even combining several models on the same platform to highlight VIP areas. Very solid bleacher according to Spanish and European regulations.

Metallic structure (frame, pillars, and trussers) made of steel profiles cold laminated S275, hot
galvanised at 450 ºC. Optional: cataphoresis plus epoxy paint treatment.

Metallic dismountable bleachers (benches) for sports HC63-20 with 2 rows

Metallic dismountable bleachers (benches) for sports HC63-20 with 2 rows

Article: metallic—dismountable—bleachers—benches—for—sports—hc63—20—with—2—rows


Made in: EU

Model: HC63—20 with 2 rows

Category: Tribune, seats

Technicals Features:
The bleacher is very easy to assemble — it takes minimal time to assemble/disassemble and there is no need for screws. Furthermore, the foldaway components ensure reduced storage and transit space.

Metallic structure (frame, pillars and trusses) made of steel profiles cold laminated S275, hot galvanised at 450 ?C.
Platforms and stairs of polypropylene frame, anti—slippery with slots, easy cleaning.

Safety handrails are not necessary due to the minimum high of the grandstand.
(only 34 cm height at the third row).

Metallic dismountable bleachers (benches) for sports HC63-20 with 3 rows

Metallic dismountable bleachers (benches) for sports HC63-20 with 3 rows

Article: metallic—dismountable—bleachers—benches—for—sports—hc63—20—with—3—rows


Made in: EU

Model: HC63—20 with 3 rows

Category: Tribune, seats

Technicals Features:
The bleacher is very easy to assemble — it takes minimal time to assemble/disassemble and there is no need for screws. Furthermore, the foldaway components ensure reduced storage and transit space.

Metallic structure (frame, pillars and trusses) made of steel profiles cold laminated S275, hot galvanised at 450 ºC.
Platforms and stairs of polypropylene frame, anti—slippery with slots, easy cleaning.

Safety handrails are not necessary due to the minimum high of the grandstand (only 54 cm height at the third row).

Metallic dismountable bleachers (benches) for sports HC72-25

Metallic dismountable bleachers (benches) for sports HC72-25

Article: metallic—dismountable—bleachers—benches—for—sports—hc72—25


Made in: EU

Model: HC72—25

Category: Tribune, seats

Technicals Features:
Dismountable metallic bleacher. Either the outside or inside installation can be fixed or temporarily fixed, for universal usage, estimated audience density: 3 people/m2. Easy to assemble, minimum assembly and disassembly time, no need for screws. Foldaway components means reduced storage and transit space.

Modular design:

— Modules of seats: 5 people each row (2,25 m)
— Modules of stairs: 2 people (0,96 m)
In all modules the stands include a safety protection panel beneath each row of seats.

Rows height:

— 2 or 3 rows.
— Height can be increased at multiples of 3 rows (up to 21 rows).
— Please contact us for details regarding alternative options.

Equipment, approved by: