Sports equipment for weightlifting and powerlifting at weightlifting halls
RACK SQUATS ER01 for fitness centers
Article: rack-squats-er01-for-fitness-centers
Made in: EU
Model: ER01
Category: Fitness benches, racks, free weights
Technicals Features:
Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.
Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.
Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.
Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.
More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.
RACK SQUAT SR10 for fitness centers
Article: rack-squat-sr10-for-fitness-centers
Made in: EU
Model: SR10
Category: Fitness benches, racks, free weights
Technicals Features:
Chassis: Steel tube 110 x 52 mm, with a thickness of 3 mm.
Soldado according UNE EN 10219, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process using 4 - roller system, avoiding deformation in the process, keeping its physical characteristics throughout the piece.
Painting: 50 microns epoxy primer. Surface finish with two component epoxy paint 90 microns, with high antioxidant level moisture and sweating. High quality pigment, with high gloss finish used in automotive. Tunnel painted painting and drying at 60 °.
ROPE PULLING Biceps Triceps BT57064
Article: rope-pulling-biceps-triceps-bt57064
Made in: EU
Model: BT57064
Category: Fitness benches, racks, free weights
Technicals Features:
ROPE tration BT57066
Article: rope-tration-bt57066
Made in: EU
Model: BT57066
Category: Fitness benches, racks, free weights
Technicals Features:
SET OF FITNESS PUMP FPS - Inventory for fitness
Article: set-of-fitness-pump-fps---inventory-for-fitness
Made in: EU
Model: FPS
Category: Inventory for fitness
Technicals Features:
1 stick, 2 caps, 2 disks 1.25 kg, 2.5 kg 2 discs and 2 discs of 5 kg
Stadium seats M2009-M2009 SMALL metallic console - UEFA recommendations and FIBA approved
Article: stadium-seats-m2009-m2009-small-metallic-console---uefa-recommendations-and-fiba-approved
Made in: EU
Model: M2009-M2009 SMALL metallic console
Category: Tribune, seats
Technicals Features:
High back seat, UEFA reccomandations and FIBA approved. Ideal for narrow step depth. Upon request is available the SMALL version with depth 300 mm. The shape of the seat allows the user to enjoy the sporting event in comfort, without sacrificing strength and durability thanks to the 3 fixing points and the numerous ribs under the seat and behind the back.
OVERALL DIMENSIONS M2009
Height 350 mm; depth 320 mm; width 440 mm
OVERALL DIMENSIONS M2009 SMALL
Height 350 mm; depth 300 mm; width 440 mm
MATERIAL
Polypropylene (PP) or polyamide (PA); injection moulded
INSTALLATION
Directly on concrete step, on riser mounted polyamide or metallic bracket, on metal beam 2-3-4-5 seats
FIXING
Provides from 1 to 3 fixing points if installed directly on concrete step; up to 5 fixing points when installed on polyamide/metal bracket or on metal beam.
Stadium seats M2010 - FIBA FIFA UEFA approved
Article: stadium-seats-m2010---fiba-fifa-uefa-approved
Made in: EU
Model: M2010
Category: Tribune, seats
Technicals Features:
High back seat, dimensionally complying with the recommendations of FIFA/UEFA/FIBA. Its shape allows the user to enjoy the sporting event in total comfort, without sacrifi cing strength and durability thanks to the 4 fi xing points.
OVERALL DIMENSIONS
Height 320 mm; depth 400 mm; width 420 mm.
MATERIAL
Polypropylene (PP) or polyamide (PA); injection moulded.
INSTALLATION
Directly on concrete step, on riser mounted polyamide or metallic bracket, on metal beam 2-3-4-5 seats.
FIXING
4 fixing points; the numerous ribs under the seat and behind the back reduce possible vandalism.
Stadium seats M2010 Metallic console - FIBA FIFA UEFA approved
Article: stadium-seats-m2010-metallic---fiba-fifa-uefa-approved
Made in: EU
Model: M2010 Metallic console
Category: Tribune, seats
Technicals Features:
High back seat, dimensionally complying with the recommendations of FIFA/UEFA/FIBA. Its shape allows the user to enjoy the sporting event in total comfort, without sacrifi cing strength and durability thanks to the 4 fi xing points.
OVERALL DIMENSIONS
Height 320 mm; depth 400 mm; width 420 mm.
MATERIAL
Polypropylene (PP) or polyamide (PA); injection moulded.
INSTALLATION
Directly on concrete step, on riser mounted polyamide or metallic bracket, on metal beam 2-3-4-5 seats.
FIXING
4 fixing points; the numerous ribs under the seat and behind the back reduce possible vandalism.
Stadium seats M90 - FIBA approved
Article: stadium-seats-m90---fiba-approved
Made in: EU
Model: M90
Category: Tribune, seats
Technicals Features:
Seat without backrest, FIBA approved. Its shape allows the user to enjoy the sport event in total comfort, without sacrifi cing strength and durability thanks to the 2 fi xing points and the numerous ribs under- neath the seat.
OVERALL DIMENSIONS
Height 110 mm, depth 350 mm, width 400 mm.
MATERIAL
Polypropilene (PP) or polyamide (PA); injection moulded.
INSTALLATION
Directly on concrete step, on riser mounted polyamide or metallic bracket, on metal beam 2-3-4-5 seats.
FIXING
Provides 2 fi xing points; the numerous ribs under the seat reduce possible vandalism.
Stadium seats M94 with front piece - FIBA approved
Article: stadium-seats-m94-with-front-piece---fiba-approved
Made in: EU
Model: M94 with front piece
Category: Tribune, seats
Technicals Features:
Seat without backrest, FIBA approved. Ideal for steps with reduced depth.Its shape allows the user to enjoy the sport event in total comfort, without sacrificing strength and durability. It provides up to 3 fixing points.
OVERALL DIMENSIONS
Height 85 mm, depth 300 mm, width 400 mm
MATERIAL
Polypropilene (PP) or polyamide (PA); injection moulded
INSTALLATION
Directly on concrete step, on riser mounted polyamide or metallic bracket, on metal beam 2-3-4-5 seats
FIXING
Provides from 1 to 3 fixing points
DRAINAGE
Its central hole prevents the accumulation of water.
ACCESSORIES
PVC or aluminium numbered label secured by means of anti-tear rivets, front piece M94, metallic armrest with plastic pad eventually complete of glass holder.
