Swiss Timing The AVK group has become a member of IAKS
Send inquiry to project-manager

Sports equipment for water polo at pools


Field for Water Polo certificated by FINA

Field for Water Polo certificated by FINA

Made in: EU

Model: 14042

Category: Equipment for water polo

Technicals Features:
The Competitor Water Polo Fields of Play are made according to FINA and LEN rules. They may be made for men, women, master or any custom sized field. A performing field for players and audience. Competitor Water Polo Fields are complete with tension springs and take up reels. The goal lanes attach directly to the hooks on the goals. The lanes of the Water Polo field are fitted to the wall or floor anchors (not included)

Our fields are constructed with the wave—damping effects of the Competitor patented flow—through design, which controls water turbulence by allowing wave energy to be dispersed along the length of the wave. Each field consists of a series of 100 mm polyethylene discs and donuts strung o a stainless steel cable. Each discs is designed to rotate independently of the others. This allows the wave energy to be absorbed and dispersed within the lane. This wave reduction optimises pool conditions for training and competition.

According to FINA rules the distance between the respective goal lines shall be 30 metres for games played by men and 25 metres for games played by women. The width of the field of play shall be 20 metres. For masters the distance shall be 23.5 metres minimum between the respective goal lines and the uniform width shall be 17 metres minimum.

Ball holder - for goal judger

Ball holder - for goal judger

Made in: EU

Model: 1514009

Category: Equipment for water polo

Technicals Features:
Ball holder to be placed on water polo referee´s catwalk.

Material: Polycarbonate. Measurements: 0,65 x 0,24 x 0,75 m.

Ball release

Ball release

Made in: EU

Model: 1514007

Category: Equipment for water polo

Technicals Features:
The ball release is used for the start of play of water polo matches. Retained on the half distance line, the ball is put into play when the ball release is submerged by pulling the rope from the side of the pool, allowing for fair and accurate starts every time. Manufactured from EVA foam, high density plastic and stainless steel, it is designed to hold both men and women water polo balls. In order to use this release system, two eyebolts need to be installed at the bottom of the pool.

Materials: EVA foam, high density plastic and stainless steel.

Beach - Junior Water Polo Goal, made according to FINA standards

Beach - Junior Water Polo Goal, made according to FINA standards

Made in: EU

Model: 1511004

Category: Equipment for water polo

Technicals Features:
Beach/Junior Water Polo Goal made according to FINA rules. It's a free—floating model with reliable frame construction made of aluminum profiles, powder painted white and with a floating white support. The width of the support ensures a stable well afloat goal. Main features: It arrives almost ready to use, as easy as 1—2—3! It is foldable for ease of storage and transport. It is provided with a possibility for adjusting water level position. Comes equipped with castors for ease of transport and handling.

Water polo goal, free—floating. Width 3 m. Height: 90 cm. Depth: 158,6 cm. Material: Aluminum. Measurements of frame: 75 x 40 mm. Nets included. Sold by unit. Freight info: 375 x 165 x 30 mm (Note the length of 375 mm!). 1,85m3. 65 kg per box with one unit.

Field with goals youth inflatable for water polo

Field with goals youth inflatable for water polo

Made in: EU

Model: 1515006

Category: Equipment for water polo

Technicals Features:
The Official HabaWaba youth water polo field of play used since 2013 designed by Malmsten. Complete field of play with boundary field lanes and goals. Assembled pieces: two HabaWaba youth water polo goals Malmsten; four corner pieces; eight side panels; four tube fixations for field corners. Takes only a few minutes to inflate and install. Portable and easy to move around in supplied storage bag.

Made from reinforced PVC. 2 pumps and storage bag included. Dimensions when in use: Field of 20 x 15 m (adjustable to 20 x 11 m) and Water Polo goals with inside frame of 2.15 x 0.75 mm (the HabaWaba Official size).

Official FINA goal for water polo

Official FINA goal for water polo

Made in: EU

Model: 1511003

Category: Equipment for water polo

Technicals Features:
Water Polo Goal is popular competition goal and the Official product for LEN and FINA. It's a free—floating model with reliable frame construction made of aluminum profiles, powder painted white and with a floating white support. The width of the support ensures a stable well afloat goal. This goal suits perfectly for competition as well as training activities, as its high quality and easy to handle.
Main features:
— It arrives almost ready to use, as easy as 1—2—3!
— It is foldable for ease of storage and transport
— It is provided with a possibility for adjusting water level position
— Comes equipped with castors for ease of transport and handling

PODIUM FOR AWARD CEREMONY in water sports competitions

PODIUM FOR AWARD CEREMONY in water sports competitions

Made in: EU

Model: E5061

Category: Equipment for swimming pools

Technicals Features:
Made of 13mm thick phenolic fiber.
Frame made of stainless steel square tube 30x30mm.
Divided in 3 modules of 25, 35 and 45cm height.
Stackable modules for better storage.
Stacked modules dimensions: 120x60cm.
Number included.

Referees structure Catwalk for water polo

Referees structure Catwalk for water polo

Made in: EU

Model: P749

Category: Equipment for water polo

Technicals Features:
Made in electropolished stainless steel and covered with special anti—slip ABS flow throught grating. With detachable supports. Quick to assemble and dismantle thanks to the quick—fit system. With 8 stairs (2 in each end). Dimensions: 2 x 34m (modules: 100cm wide and 70cm tall)

Referees structure Catwalk for water polo certificated by FINA

Referees structure Catwalk for water polo certificated by FINA

Made in: EU

Model: 1515003

Category: Equipment for water polo

Technicals Features:
The catwalk is a flexible system, easy to install and to put away after the competition. The catwalk usually has the length of the field of play for water polo, and is, most often, made up from 16 sections, that are 2 meter long, 1 meter wide and 60 cm in height. It is an easy hook—on system. There is a possibility for steps on the short sides of the catwalk (2 x 0,5 meter steps of 20 and 40 cm).
For major championships, in water polo, there is a 30—meter long catwalk long side the play of field on both sides of the pool, and the catwalk has the color markings of the play of field. This platform may be used for other activities around the pool.
Main features:
— Official product for LEN and FINA
— Solid, water proof, with anti—slip cover
— Easy hook—on system. Lockable
— Storage boxes on wheel
Related products: Transport and storage box (1514010) Water polo ball holder (1514009)

Take-up Reel

Take-up Reel

Made in: EU

Model: 1011008

Category: Equipment for swimming pools

Technicals Features:
The take—up—reel mounted on one side of the lane line with wall anchor 2010003 and lane hook 1013002. Alternatively can be assembled in the pool deck with a lane post 1013001 and floor anchor 2010001.On the other end of the lane line assembled a tension spring 1011010. The take—up—reel should only be used with the ratchet spanner from Malmsten Competitor (1011002) — other tools cause unrepairable damage of the item. The take—up—reel comes with a red plastic protective cover with the Competitor—logo.

Equipment, approved by: