<p>AVK Group</p> <p>The AVK group has become a member of IAKS</p> Member of International Association for Sports and Leisure Facilities
EQUIPMENT OF SPORTS FACILITIES
Since 2009
@ e-mail: office@avkgroup.at
📞 Tel: +43 1 890 05 82
Send inquiry to project-manager

Swimming pools

Supply and installation of sports and technological equipment, timing and refereeing systems, scoreboards, video screens

Official representative 'Swiss Timing' 'Seicom' 'Malmsten' 'Sportsystem'

6 Station pulley cross over

Article: AVTJ3015

Length: 6023 mm.

Width: 2311 mm.

Height: 2235 mm.

Weight: 1063 kg

Main frame: Steel tube of 120x50x2mm OVAL. and 100x50x2 mm.

Pictogram instructions included.
Label Warning signs and safety of use.
Needle selection of the weights of aluminum magnet to prevent falling when
performing the exercises and spiral wire to prevent their loss.
Cable traction weights: Steel in a 7x19 configuration with 3 +1 mm. in diameter and coated with polyamide to 4 mm. with a breaking strength of 560 K.
Pulleys: Made of polypropylene, double sealed bearings and precision ground to ensure long life of the cables, smooth movement and maximum durability.
Fairings: Cowl of the towers where the weights on ABS to improve the appearance and increase safety.
Safety: Machine manufactured under UNE-EN 957.1 and 957.2
Plates or weights, gauge steel, polyamide caps have a smoother operation and avoid noise in the exercise.
Load: 2 to 100 K. High Pulley 2 to 100 K. Low Pulley Two outputs for crossing 80 +80 K. With dominated bar.
The supports are placed where the feet are covered RILSAN 2 mm. thick
Seats: Made of high density foam (150) with a thickness of 4 cm. upholstered with flame retardant skay.
Painting: Metal parts undergo degreasing and phosphate tunnel, then passes through an electrostatic paint booth and painted with polyester powder paint. Passed through an oven for curing at 220°.
Made in EU.

Add to your inquiry to the project manager

Another sports equipment from category

Standing leg curl Standing leg curl

Article: AVTJ3033
Length: 1242 mm.
Width: 1099 mm.
Height. 1668 mm.
Weight: 169 Kg
Main frame: Steel tube of 120x50x2mm OVAL. and 100x50x2 mm.

3 Station pulley 3 Station pulley

Article: AVTJ3012
Length: 2298 mm.
Width: 1928 mm.
Height: 2235 mm.
Weight: 245 Kg
Main frame: Steel tube of 120x50x2mm OVAL. and 100x50x2 mm.

Adductor-Abductor-Gluteus Adductor-Abductor-Gluteus

Article: AVTJ3026
Length: 1675 mm.
Width: 1133 mm.
Height. 1505 mm.
Weight: 330 Kg
Main frame: Steel tube of 120x50x2mm OVAL. and 100x50x2 mm.

Trade marks