<p>AVK Group</p>
<p>The AVK group has become a member of IAKS</p>
Member of International Association for Sports and Leisure Facilities
EQUIPMENT OF SPORTS FACILITIES
Since 2009
Send request

Swimming pools

Supply and installation of sports and technological equipment, timing and refereeing systems, scoreboards, video screens

Official representative 'Swiss Timing' '<p>Malmsten</p>' 'Sportsystem' '<p>Seicom</p>'

Raised landing pit with integrated platform

Raised landing pit with integrated platform AVGY1186

Article: AVGY1186

Material: Stretch jersey, PVC, Foam

Color: gray

Dimensions:

Above ground pit, with a platform and wooden guard rail.

This type of pit avoids the need for masonry work.

Provides all the advantages of a GYMNOVA pit (easy exit, visible landing area, hygienic, safe, reduced fire risks), with an advanced design and choice of products.

This pit provides real cushioning for landings, far superior to the technique used for high jump landing (foam lattice).

Comprises:
1- Cover fabric: stretch jersey, washable, class M1 fire rated.
2- Moulded PVC edge holds down jersey cover. Removable to make it easier to dismantle and tighten the cover.
3- Foam safety mat: very soft, shock absorbent polyurethane foam, thickness 20 cm (shock absorption phase 1).
4- Protective interface: distributes loads at pit edges, protects foam from concrete.
5- Interlocking solid cellular foam sections: the middle safety mat absorbs impact (shock absorption phase 2), and the interface support mat completes shock absorption by cancelling out the rebound effect (shock absorption phase 3).
6- Side maintenance block - Stability: whole unit is set in to restore appearance after landing.
7- Spring compensator - Adjustment: maintains the volume of the pit by reinforcing the landing areas which receive most stress.
8- Grating: covers the whole pit area. Isolates foam from the ground and allows complete ventilation.

Add to request

Another sports equipment from category

”Manoni” type landing mat ”Manoni” type landing mat

Article:AVSS1063
Filler made of foam, covered with pvc. Dimensions 400x200x50 cm, composed of two elements cutted at 45° to be joined together by attaching the velcro strips. Density 16 kg/mc. Equipped with handles, zip and breather holes. Made in EU.

Mat Mat

Article:AVSS1036
D. 80, Dimensions: 200 x 100 x 5 cm. Slip—proof bottom side. Filler: foam. Made in EU.

Traditional landing mat for rings - beam - asymmetric, parallel and high bars - with bib on the side - 400x230x20 cm - FIG approved Traditional landing mat for rings - beam - asymmetric, parallel and high bars - with bib on the side - 400x230x20 cm - FIG approved

Article:AVGY1125
Material: Removeable PVC cover, Foam
Color: beige/red
Dimensions:
400 x 230 x 20 cm (LxWxTh).
Compliance with: FIG
o each other and to avoid gaps (hook and loop fastener on the top).

Trade marks