Weather cover for pole vault landing system
Article: AVDM1220
In 1000 denier Tergal fabric. 4 stitchings Seam. System with hooks and straps in the corners closing the weather cover to the landing mat, and protecting against high wind.
Possibility of insertion of the draining dome, preventing from water stagnation on the landing mat (optional).
Made in EU.
Dimensions:
For Up&down pole vault single cover landing system – 11.00x6.00x0.8/0.4 m
For Up&down pole vault landing system – 11.00x6.00x0.87/0.47 m
For Club pole vault landing system – 6.30x5.00x0.80/0.50 m
For Club single cover pole vault landing system – 6.30x5.00x0.73/0.43 m
For Basic pole vault landing system – 4.25x5.00x0.60/0.40 m
For Meeting double front landing system – 10.00x5.00x0.80/0.50 m
For High championship pole vault landing system – 10.00x7.00x0.87/0.47 m
For Federal pole vault landing system - 7.50x5.50x0.80/0.50 m
For Meeting pole vault landing system – 7.00x5.00x0.80/0.50 m
For Meeting reversible pole vault landing system – 7.00x5.00x0.80/0.50 m
For Concept IV pole vault landing system – 9.50x6.20x0.87/0.37 m
For International pole vault landing system – 8.00x6.00x0.80/0.50 m
For International pole vault landing system – 8.00x6.00x0.87/0.47 m
Another sports equipment from category
Frame for reversible take-off board
Article: AVDM1063
Material: Aluminum
Width: 32 cm
Colour: White, grey
Installation tray to be cast in concrete for DIMA`s Competition take—off board (item ref. AVDM1245). Made from 5 mm thick aluminum for increased rigidity. Made in EU.
Extended rail to be embedded with sliding cart and cover
Article: AVDM1201
Ideal for indoor use or for multi—sport areas.
Rails made of high quality steel, fitted into an aluminum frame box for a controlled and safe installation. Lid to be covered with synthetic.
Width of the frame : 380 mm
Length of the frame and rails: 2000 mm
Width of rail : 350 mm
The sliding carts can be equipped with either ref. AVDM1028 or AVDM1029 pole—vault uprights.
Made in EU.
Federal pole vault landing system 7,50 x 5,50 x 0,80/0,50 m
Article: AVDM1010
Competition pole vault landing area compliant with national—level requirements and providing maximum athlete safety.
