Swiss Timing The AVK group has become a member of IAKS
Send inquiry to project-manager

Sports main equipment for football and soccer at school halls and playgrounds

Soccer goals 400x200 cm, oval section 120x100 mm, ground sockets  - acc. to EN748

Soccer goals 400x200 cm, oval section 120x100 mm, ground sockets - acc. to EN748

Article: soccer—goals—400x200—cm—oval—section—120x100—mm—ground—sockets————acc—to—en748


Made in: EU

Model: S04323

Category: Equipment for football

Technicals Features:
Pair of aluminium reduced goals for soccer, dimensions 400x200 cm, oval section 120x100 mm, ground sockets model with curved net supports

Soccer goals 400x200 cm, oval section 120x100 mm, portable  - acc. to EN748

Soccer goals 400x200 cm, oval section 120x100 mm, portable - acc. to EN748

Article: soccer—goals—400x200—cm—oval—section—120x100—mm—portable————acc—to—en748


Made in: EU

Model: S04322

Category: Equipment for football

Technicals Features:
Pair of aluminium reduced goals for soccer, dimensions 400x200 cm, oval section 120x100 mm, portable freestanding model with ground base

Soccer goals 400x200 cm, round section diameter 80 mm, portable

Soccer goals 400x200 cm, round section diameter 80 mm, portable

Article: soccer—goals—400x200—cm—round—section—diameter—80—mm—portable


Made in: EU

Model: S04324

Category: Equipment for football

Technicals Features:
Pair of aluminium reduced goals for soccer, dimensions 400x200 cm, round section diameter 80 mm, portable freestanding model with ground base

Soccer goals 400x200 cm, round section diameter 80 mm, portable - acc. to EN748

Soccer goals 400x200 cm, round section diameter 80 mm, portable - acc. to EN748

Article: soccer—goals—400x200—cm—round—section—diameter—80—mm—portable———acc—to—en748


Made in: EU

Model: S04326

Category: Equipment for football

Technicals Features:
Pair of steel reduced goals for soccer, dimensions 400x200 cm, round section diameter 80 mm, portable freestanding model with ground base

Soccer goals for 7 a side soccer, oval section 120x100 mm - acc. to EN748

Soccer goals for 7 a side soccer, oval section 120x100 mm - acc. to EN748

Article: soccer—goals—for—7—a—side—soccer—oval—section—120x100—mm———acc—to—en748


Made in: EU

Model: S04311

Category: Equipment for football

Technicals Features:
Pair of aluminium goals for 7 a side soccer, dimensions 600x200 cm, oval section 120x100 mm, ground sockets model with curved net supports

Soccer goals for 7 a side soccer, round section diameter 80 mm

Soccer goals for 7 a side soccer, round section diameter 80 mm

Article: soccer—goals—for—7—a—side—soccer—round—section—diameter—80—mm


Made in: EU

Model: S04312

Category: Equipment for football

Technicals Features:
Pair of aluminium goals for 7 a side soccer, dimensions 600x200 cm, round section diameter 80 mm, portable freestanding model with ground base

Soccer goals for 7 a side soccer, round section diameter 80 mm - acc. to EN748

Soccer goals for 7 a side soccer, round section diameter 80 mm - acc. to EN748

Article: soccer—goals—for—7—a—side—soccer—round—section—diameter—80—mm———acc—to—en748


Made in: EU

Model: S04314

Category: Equipment for football

Technicals Features:
Pair of steel goals for 7 a side soccer, dimensions 600x200 cm, round section diameter 80 mm, portable freestanding model with ground base

Soccer goals for Playgrounds, Compact, 3x2 m

Soccer goals for Playgrounds, Compact, 3x2 m

Article: soccer—goals—for—playgrounds—compact—3x2—m


Made in: EU

Model: 10592

Category: Equipment for football

Technicals Features:
“Compact” means: Crossbar/post construction is welded in one piece, as is the entire base frame. A special connection system is
used to connect the crossbar/post construction to the base frame, where it is screwed in with self—retaining screws. Then only the
net bracket construction and net remain to be mounted – and the goal is ready to use.
Compared to fully welded goals, the compact construction has the advantage of offering a shock—absorbing effect, relieving the construction. This means that the familiar fatigue fractures in the welded seams do not occur around the post/base frame construction.

The entire goal is made from oval profiles 120/100 mm. Because the ISSN (integrated Safety system net holder) is mounted in a
deeper groove in the profile, it ends flush with the profile. This has significant advantages, especially for the goalkeeper around the base frame. The risk of injury is minimised. The risk of injury through contact with the post is also reduced.
The net brackets are made from particularly robust aluminium tubes 50x4 mm. The goals are delivered only with our tried—andtested
Safety system net holders. 4 elbows are welded onto each goal for anchoring.

The goal is delivered with a vandal—proof net. The net is made from Hercules cord and has a diameter of 5 mm and a steel inlay.
Tensioning ropes and a mounting set are provided. The green polypropylene net has abrasion protection. The mesh size is
110 mm; the mesh position is diagonal. The net can only be destroyed with extreme violence, making it ideal for public
kick—about fields.

Standard equipment: Natural bright aluminium finish, incl. net

Goal depth 1.15 m

Soccer goals for Playgrounds, completely welded, 3x2 m

Soccer goals for Playgrounds, completely welded, 3x2 m

Article: soccer—goals—for—playgrounds—completely—welded—3x2—m


Made in: EU

Model:
Cat.—no. 1060: Goal frame of square profiles 80x80 mm
Cat.—no. 1061: Goal frame of oval profiles 120/100 mm

Category: Equipment for football

Technicals Features:
Wherever you need very strong goals, for example on playgrounds or school yards, we developed these goals completely welded in one piece made of aluminium.
A net is not necessary. There is a frame of stable aluminium tubes of 35x3 mm to catch the ball. Distance of tubes is 88 mm.
The rear and lateral tubes are welded to an aluminium rectangular profile. 4 angles are welded to fasten the goal (freestanding goals).

Very important: Goal depth is 1 m. You can choose two different executions: crossbar/upright of square profiles 80x80 mm or of oval profiles 120/100 mm.

Standard equipment: Natural bright aluminium bright finish.

Soccer goals for Playgrounds, completely welded, with Basketball unit, 3x2 m

Soccer goals for Playgrounds, completely welded, with Basketball unit, 3x2 m

Article: soccer—goals—for—playgrounds—completely—welded—with—basketball—unit—3x2—m


Made in: EU

Model:
Cat.—no. 10601: Goal frame of square profiles 80x80 mm
Cat.—no. 10611: Goal frame of oval profiles 120/100 mm

Category: Equipment for football

Technicals Features:
Wherever you need very strong goals, for example on playgrounds or school yards, we developed these goals completely welded in
one piece made of aluminium. A net is not necessary. There is a frame of stable aluminium tubes of 35x3 mm to catch the ball. Distance of tubes is 88 mm. The rear and lateral tubes are welded to an aluminium rectangular profile. 4 angles are welded to fasten the goal (freestanding goals).

The execution with a basketball unit provides an overhang of 60 cm and is delivered with a glassfibre back board of 120x90 cm, absolutely weather—proof, basket and net.

Goal depth is 1 m.

Standard equipment: Natural bright aluminium bright finish.

Equipment, approved by: