Swiss Timing The AVK group has become a member of IAKS
Send inquiry to project-manager

Sports equipment for short track at ice arenas: auxiliary equipment

Dustcleaner U-840 for skate sharpening machine

Dustcleaner U-840 for skate sharpening machine

Made in: EU

Model: U—840

Category: equipment for sharpening skates

Specifications:
For removal of grinding dust and particles we recommend and sell the dustcleaner U—840, a welding fume eliminator produced by Nederman. It should be attached to SSM—2 and SSM PROFIL when sharpening to minimize the discharges. It has an exchangable filter (U—324) and keeps the same vacuum strength until the filter is full. A filter will be sufficient for approximately 2000 pairs of skates.

Dust extractor NQS500 for skate sharpening machine

Dust extractor NQS500 for skate sharpening machine

Made in: EU

Model: NQS500

Category: equipment for sharpening skates

Specifications:
For removal of grinding dust and particles we recommend and sell the dust extractor NQS500, produced by Numatic. A dust extractor should be attached to our machines when sharpening to minimize the discharges. NQS500 uses a high quality motor which is extremely quiet and has two different suction levels (high or low). The engine is protected by two different filters. This model uses a real cyclon intake which maximize the spreading of dust inside the filter..

Riveting machine NM-11

Riveting machine NM-11

Made in: EU

Model: NM—11

Category: Equipment for sharpening skates

Technicals Features:
The NM—11 was first released back in the seventies. Several thousands are by now used worldwide. A riveting machine is always a good investment. Often the skate blade is worn out before the skate boot. By having access to a skate riveter you can change the skate blade (or just replace damaged eyelets and rivets) instead of having to buy a completely new pair of skates.
This riveting machine is primarily used on skates but some functions can also be used on boots, ski boots, roller blades and prosthetics. Included with the NM—11 are tools sets N—21 and N—E.

Skate sharpening machine AS 1001 Portable

Skate sharpening machine AS 1001 Portable

Made in: Sweden

Model: AS 1001 Portable

Category:

Technicals Features:
Power: 1 phase 100—240 VAC 50—60 Hz, 200 W
Length: 26 Inch (660 mm)
Width: 8 Inch (200 mm)
Height: 9 Inch (240 mm)
Weight: 40 lbs (18 kg)

Skate sharpening machine AS 2001 Allpro

Skate sharpening machine AS 2001 Allpro

Made in: Sweden

Model: AS 2001 Allpro

Category:

Technicals Features:
Power: 1 phase 100—240 VAC 50—60 Hz, 300 W
Length: 50 Inch (1250 mm)
Width: 14 Inch (350 mm)
Height: 12 Inch (300 mm)
Weight: 77 lbs (35 kg+ transportation box)

SKATE SHARPENING MACHINE RSM 4

SKATE SHARPENING MACHINE RSM 4

Made in: EU

Model: RSM 4

Category: Equipment for sharpening skates

Technicals Features:
This is the fourth generation of an automatic radius sharpening machine that has been present on the Olympic Games several times. It is intended for short track skates, long track skates and tour skates. Five radius templates of your choice are included. Contact Zandstra sports or SSM for more information and availability. RSM 4 is available in a CE approved 220—240 V version.

Skate sharpening machine SkatePal-Pro2

Skate sharpening machine SkatePal-Pro2

Made in: Sweden

Model: SkatePal—Pro2

Category:

Technicals Features:
Power: 12 VDC, 1 phase 100—240 VAC 50—60 Hz, 180 W
Length: 670 mm
Width: 210 mm
Height: 12 Inch (300 mm)
Weight: 320 mm

SKATE SHARPENING MACHINE SSM-2 and SSM-2 PRO

SKATE SHARPENING MACHINE SSM-2 and SSM-2 PRO

Made in: EU

Model: SSM—2 and SSM—2 PRO

Category: Equipment for sharpening skates

Technicals Features:
The sales record speaks for itself: an astonishing 20000 pcs. has been sold so far throughout the world. This portable high quality skate sharpener is intended to do the finishing sharpening (flat or hollow) on skates. The main advantage of the SSM—2 is that it is very fast and easy to use while delivering great precision. The SSM—2 is available in a CE—approved 220—240 V version and an ETL—approved 110—120 V version.

SKATE SHARPENING MACHINE SSM-2/SM6

SKATE SHARPENING MACHINE SSM-2/SM6

Made in: EU

Model: SSM—2/SM6

Category: Equipment for sharpening skates

Technicals Features:
The SM—6 is designed in a way that makes contouring comfortable. Following the instruction you mark the skate and insert it in the holder. You then insert the template you want. The holder will be guided after the template and you can feed it inwards or outwards by turning a knob. When grinding sparks are equal over the marked area (the contour area) you are finished.

SKATE SHARPENING MACHINE SSM PROFIL

SKATE SHARPENING MACHINE SSM PROFIL

Made in: EU

Model: SSM PROFIL

Category: Equipment for sharpening skates

Technicals Features:
EFFECTIVE AND COOL GRINDING — By using a vertical grinding wheel you will get a very small contact surface between the skate blade and the grinding wheel. This leads to faster removal of material and gives a cooler grind. You will be able to profile a skate in 1—5 minutes.

SUPER ACCURACY — The vertical grinding wheel will guarantee a more exact transfer of the contour from the template compared to using a horizontal grinding wheel. Not having sufficient work—pressure leads to bumps and undesireable shape on the skate blade.

ELMINATE ERRORS — This machine has a fine—adjusting device that will help you align the skate blade perfectly after the template.

NEW PITCH/PIVOT SYSTEM — In 2016 we designed an easy system to shift the contour template to alter the pivot/pitch of profiles very accurately.

COPY YOUR SKATE BLADE — From 2016 it is also possible to fully copy a skate blade shape directly onto another skate blade by using the old skate blade as a template! (Assuming an optimal shape has been found.)

Equipment, approved by: