Strength equipment for fitness centers
PRESS INCLINE SR04 for fitness centers
Article: press-incline-sr04-for-fitness-centers
Made in: EU
Model: SR04
Category: Strength equipment
Technicals Features:
Chassis: Steel tube 110 x 52 mm, with a thickness of 3 mm.
Soldado according UNE EN 10219, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process using 4 - roller system, avoiding deformation in the process, keeping its physical characteristics throughout the piece.
Painting: 50 microns epoxy primer. Surface finish with two component epoxy paint 90 microns, with high antioxidant level moisture and sweating. High quality pigment, with high gloss finish used in automotive. Tunnel painted painting and drying at 60 °.
PRESS SHOULDER E20 for fitness centers
Article: press-shoulder-e20-for-fitness-centers
Made in: EU
Model: E20
Category: Strength equipment
Technicals Features:
Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.
Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.
Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.
Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.
More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.
PRESS SHOULDER SR03 for fitness centers
Article: press-shoulder-sr03-for-fitness-centers
Made in: EU
Model: SR03
Category: Strength equipment
Technicals Features:
Chassis: Steel tube 110 x 52 mm, with a thickness of 3 mm.
Soldado according UNE EN 10219, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process using 4 - roller system, avoiding deformation in the process, keeping its physical characteristics throughout the piece.
Painting: 50 microns epoxy primer. Surface finish with two component epoxy paint 90 microns, with high antioxidant level moisture and sweating. High quality pigment, with high gloss finish used in automotive. Tunnel painted painting and drying at 60 °.
PRESS SHOULDERS V20 for fitness centers
Article: press-shoulders-v20-for-fitness-centers
Made in: EU
Model: V20
Category: Strength equipment
Technicals Features:
Transmission: Steel cable 6 mm thick PVC covered with 900 kg of Looser resistance®.
Guides: solid steel and double chrome hardened.
Setting: Tube high strength steel (3 mm thick) laser cut for precision and welded by robotized process.
Filling: High density artificial leather, resistant, antibacterial and anti - allergic double padded surfaces on models with intensive perspiration.
Painting process: 3 - layer coating. The steel has been pickled and phosphated coated and evenly, coincidently. Antioxidant to ensure life to painting Two final coats of epoxy powder paint pure polyester primer, drying at 240 ° C.
PRESS SR06 for fitness centers
Article: press-sr06-for-fitness-centers
Made in: EU
Model: SR06
Category: Strength equipment
Technicals Features:
Chassis: Steel tube 110 x 52 mm, with a thickness of 3 mm.
Soldado according UNE EN 10219, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process using 4 - roller system, avoiding deformation in the process, keeping its physical characteristics throughout the piece.
Painting: 50 microns epoxy primer. Surface finish with two component epoxy paint 90 microns, with high antioxidant level moisture and sweating. High quality pigment, with high gloss finish used in automotive. Tunnel painted painting and drying at 60 °.
PRESS VERTICAL CHEST E01 for fitness centers
Article: press-vertical-chest-e01-for-fitness-centers
Made in: EU
Model: E01
Category: Strength equipment
Technicals Features:
Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.
Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.
Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.
Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.
More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.
PRESS VERTICAL SR01 for fitness centers
Article: press-vertical-sr01-for-fitness-centers
Made in: EU
Model: SR01
Category: Strength equipment
Technicals Features:
Chassis: Steel tube 110 x 52 mm, with a thickness of 3 mm.
Soldado according UNE EN 10219, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process using 4 - roller system, avoiding deformation in the process, keeping its physical characteristics throughout the piece.
Painting: 50 microns epoxy primer. Surface finish with two component epoxy paint 90 microns, with high antioxidant level moisture and sweating. High quality pigment, with high gloss finish used in automotive. Tunnel painted painting and drying at 60 °.
PRESS VERTICAL V01 for fitness centers
Article: press-vertical-v01-for-fitness-centers
Made in: EU
Model: V01
Category: Strength equipment
Technicals Features:
Transmission: Steel cable 6 mm thick PVC covered with 900 kg of Looser resistance®.
Guides: solid steel and double chrome hardened.
Setting: Tube high strength steel (3 mm thick) laser cut for precision and welded by robotized process.
Filling: High density artificial leather, resistant, antibacterial and anti - allergic double padded surfaces on models with intensive perspiration.
Painting process: 3 - layer coating. The steel has been pickled and phosphated coated and evenly, coincidently. Antioxidant to ensure life to painting Two final coats of epoxy powder paint pure polyester primer, drying at 240 ° C.
PULLEY HIGH AND LOW V16 for fitness centers
Article: pulley-high-and-low-v16-for-fitness-centers
Made in: EU
Model: V16
Category: Strength equipment
Technicals Features:
Transmission: Steel cable 6 mm thick PVC covered with 900 kg of Looser resistance®. Guides: solid steel and double chrome hardened.
Setting: Tube high strength steel (3 mm thick) laser cut for precision and welded by robotized process.
Filling: High density artificial leather, resistant, antibacterial and anti - allergic double padded surfaces on models with intensive perspiration.
Painting process: 3 - layer coating. The steel has been pickled and phosphated coated and evenly, coincidently. Antioxidant to ensure life to painting Two final coats of epoxy powder paint pure polyester primer, drying at 240 ° C.
REMO LOW E12 for fitness centers
Article: remo-low-e12-for-fitness-centers
Made in: EU
Model: E12
Category: Strength equipment
Technicals Features:
Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.
Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.
Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.
Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.
More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.