Strength equipment for fitness centers

Article: dorsales-ipsilateral-sr02-for-fitness-centers

Made in: EU

Model: SR02

Category: Strength equipment

Technicals Features:

Chassis: Steel tube 110 x 52 mm, with a thickness of 3 mm.

Soldado according UNE EN 10219, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process using 4 - roller system, avoiding deformation in the process, keeping its physical characteristics throughout the piece.

Painting: 50 microns epoxy primer. Surface finish with two component epoxy paint 90 microns, with high antioxidant level moisture and sweating. High quality pigment, with high gloss finish used in automotive. Tunnel painted painting and drying at 60 °.

Article: extensions-e52-for-fitness-centers

Made in: EU

Model: E52

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.

Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.

Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.

Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.

More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.

Article: extensions-v52-for-fitness-centers

Made in: EU

Model: V52

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick PVC covered with 900 kg of Looser resistance®.

Guides: solid steel and double chrome hardened.

Setting: Tube high strength steel (3 mm thick) laser cut for precision and welded by robotized process.

Filling: High density artificial leather, resistant, antibacterial and anti - allergic double padded surfaces on models with intensive perspiration. Painting process: 3 - layer coating. The steel has been pickled and phosphated coated and evenly, coincidently. Antioxidant to ensure life to painting Two final coats of epoxy powder paint pure polyester primer, drying at 240 ° C.

Article: femoral-fallen-e55-for-fitness-centers

Made in: EU

Model: E55

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.

Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.

Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.

Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.

More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.

Article: femoral-fallen-v55-for-fitness-centers

Made in: EU

Model: V55

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick PVC covered with 900 kg of Looser resistance®.

Guides: solid steel and double chrome hardened.

Setting: Tube high strength steel (3 mm thick) laser cut for precision and welded by robotized process.

Filling: High density artificial leather, resistant, antibacterial and anti - allergic double padded surfaces on models with intensive perspiration.

Painting process: 3 - layer coating. The steel has been pickled and phosphated coated and evenly, coincidently. Antioxidant to ensure life to painting Two final coats of epoxy powder paint pure polyester primer, drying at 240 ° C.

Article: femoral-seated-e53-for-fitness-centers

Made in: EU

Model: E53

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.

Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.

Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.

Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.

More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.

Article: funds-and-assisted-controlled-e13-for-fitness-centers

Made in: EU

Model: E13

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.

Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.

Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.

Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.

More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.

Article: funds-and-assisted-controlled-v13-for-fitness-centers

Made in: EU

Model: V13

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick PVC covered with 900 kg of Looser resistance®.

Guides: solid steel and double chrome hardened.

Setting: Tube high strength steel (3 mm thick) laser cut for precision and welded by robotized process.

Filling: High density artificial leather, resistant, antibacterial and anti - allergic double padded surfaces on models with intensive perspiration.

Painting process: 3 - layer coating. The steel has been pickled and phosphated coated and evenly, coincidently. Antioxidant to ensure life to painting Two final coats of epoxy powder paint pure polyester primer, drying at 240 ° C.

Article: giro-waist-v41-for-fitness-centers

Made in: EU

Model: V41

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick PVC covered with 900 kg of Looser resistance®.

Guides: solid steel and double chrome hardened.

Setting: Tube high strength steel (3 mm thick) laser cut for precision and welded by robotized process.

Filling: High density artificial leather, resistant, antibacterial and anti - allergic double padded surfaces on models with intensive perspiration. Painting process: 3 - layer coating. The steel has been pickled and phosphated coated and evenly, coincidently. Antioxidant to ensure life to painting Two final coats of epoxy powder paint pure polyester primer, drying at 240 ° C.

Article: glteos-e51-for-fitness-centers

Made in: EU

Model: E51

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.

Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.

Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.

Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.

More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.