Sports equipment for fitness at fitness centers
For Cross area accessories - SHELF, RACK 90 cm CA38
Article: for-cross-area-accessories---shelf-rack-90-cm-ca38
Made in: EU
Model: CA38
Category: Auxiliary equipment for gyms
Technicals Features:
Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.
Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.
Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).
For Cross area accessories - SUPPORT BAR CA31
Article: for-cross-area-accessories---support-bar-ca31
Made in: EU
Model: CA31
Category: Auxiliary equipment for gyms
Technicals Features:
Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.
Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.
Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).
For Cross area accessories - SUPPORT FOR DISCS CA30
Article: for-cross-area-accessories---support-for-discs-ca30
Made in: EU
Model: CA30
Category: Auxiliary equipment for gyms
Technicals Features:
Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.
Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.
Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).
For Cross area accessories - SUPPORT RODS CA28
Article: for-cross-area-accessories---support-rods-ca28
Made in: EU
Model: CA28
Category: Auxiliary equipment for gyms
Technicals Features:
Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.
Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.
Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).
For Cross area accessories - SUPPORT SAFETY BARS CA29
Article: for-cross-area-accessories---support-safety-bars-ca29
Made in: EU
Model: CA29
Category: Auxiliary equipment for gyms
Technicals Features:
Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.
Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.
Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).
For Cross area accessories - TRAMPOLIN LOW CA33
Article: for-cross-area-accessories---trampolin-low-ca33
Made in: EU
Model: CA33
Category: Auxiliary equipment for gyms
Technicals Features:
Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.
Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.
Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).
For Cross area accessories - TRAMPOLIN WALL CA32
Article: for-cross-area-accessories---trampolin-wall-ca32
Made in: EU
Model: CA32
Category: Auxiliary equipment for gyms
Technicals Features:
Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.
Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.
Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).
FUNDS AND ABDOMINAL EB10 for fitness centers
Article: funds-and-abdominal-eb10-for-fitness-centers
Made in: EU
Model: EB10
Category: Fitness benches, racks, free weights
Technicals Features:
Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.
Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.
Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.
Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.
More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.
FUNDS AND ASSISTED CONTROLLED E13 for fitness centers
Article: funds-and-assisted-controlled-e13-for-fitness-centers
Made in: EU
Model: E13
Category: Strength equipment
Technicals Features:
Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.
Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.
Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.
Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.
More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.
FUNDS AND ASSISTED CONTROLLED V13 for fitness centers
Article: funds-and-assisted-controlled-v13-for-fitness-centers
Made in: EU
Model: V13
Category: Strength equipment
Technicals Features:
Transmission: Steel cable 6 mm thick PVC covered with 900 kg of Looser resistance®.
Guides: solid steel and double chrome hardened.
Setting: Tube high strength steel (3 mm thick) laser cut for precision and welded by robotized process.
Filling: High density artificial leather, resistant, antibacterial and anti - allergic double padded surfaces on models with intensive perspiration.
Painting process: 3 - layer coating. The steel has been pickled and phosphated coated and evenly, coincidently. Antioxidant to ensure life to painting Two final coats of epoxy powder paint pure polyester primer, drying at 240 ° C.