Sports equipment for fitness at fitness centers
HEIGHTS SH - Inventory for fitness
Article: heights-sh---inventory-for-fitness
Made in: EU
Model: SH
Category: Inventory for fitness
Technicals Features:
HIGH PULLEY E11 for fitness centers
Article: high-pulley-e11-for-fitness-centers
Made in: EU
Model: E11
Category: Strength equipment
Technicals Features:
Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.
Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.
Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.
Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.
More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.
HOLDS FLEXIBLE PUB - Inventory for fitness
Article: holds-flexible-pub---inventory-for-fitness
Made in: EU
Model: PUB
Category: Inventory for fitness
Technicals Features:
Indoor cycle Magnetic MT1 for fitness centers
Article: indoor-cycle-magnetic-mt1-for-fitness-centers
Made in: EU
Model: MT1
Category: Cardio fitness
Technicals Features:
Dimensions: 128 x 61 x 105 cm. Weight (Kg.): 7 . 2 kg Maximum weight user (Kg.): 150 Kg.
Transmission: By Tape Poly-V.
Flywheel: Aluminum.
Protections: Brakes and steering wheel . inertia covered in PVC that prevents rust and corrosion from sweat
Colours: Black and green
Pedals: Mixed SPD.
Saddle: with special padding, ergonomic for the practice of female and male Indoor Cycle.
Settings the seat: stainless steel with micro adjustment: 17 positions numbered laser vertically and 12 positions horizontally.
Indoor cycle professional EX1 for fitness centers
Article: indoor-cycle-professional-ex1-for-fitness-centers
Made in: EU
Model: EX1
Category: Cardio fitness
Technicals Features:
Dimensions: . 125 x 52 x 105 cm Weight (kg.): 60 Kg. Maximum weight user (Kg.): 150 Kg.
Transmission: By Tape Poly-V.
Flywheel: Forward 20 kg in steel with zonade stainless steel braking.
Protections: Protector lateral inertia flywheel made of TPR and front, which prevents rust and corrosion caused by perspiration. Back protectors in ABS for stretching and core. Bottom bracket axle: Double front and rear bearing large and fluted extra NTN bearings.
Pedals: Mixed SPD. Dual function, to adapt the cycling shoe and conventional. Saddle: Base EVA padding especially for Indoor Cycle practice. Covered in synthetic leather.
Seat cushioning system.
Regulation saddle: Height adjustable in 16 positions. Locking threaded through pop-pin. Horizontal sliding saddle with nylon strip for smooth sliding
Seatpost: Steel pickling quality E-220 + CR2 S2 with 2.5 mm thick, with chrome surface finish in 3 phases. Holes laser cut selector positions.
Indoor cycle professional Monster for fitness centers
Article: indoor-cycle-professional-monster-for-fitness-centers
Made in: EU
Model: Monster
Category: Cardio fitness
Technicals Features:
Dimensions : 120 x 61 x 105 cm
Weight (kg.) : 70 Kg.
Maximum weight user (Kg.) : 150 Kg.
Flywheel : Forward 20kg steel with braking zone in stainless steel.
Protections: Central protector brakes and steering wheel covered inertia of PVC that prevents rust and corrosion from sweat.
Colours: White and green
Flywheel: Sealed to prevent sudorización and easy maintenance : bottom bracket axle, larger and special design more striatum with NTN bearings. Double bearing system on the right side.
Transmission: Transmission extremely smooth chain and vibration - free Pedals: Mixed SPD.
Indoor cycle Running IR1 for fitness centers
Article: indoor-cycle-running-ir1-for-fitness-centers
Made in: EU
Model: Running IR1
Category: Cardio fitness
Technicals Features:
Dimensions: 145 x 71 x 162 cm
Weight (kg.): 60 Kg.
Maximum weight user (Kg.): 150 Kg.
Transmission: With Poly-V
Flywheel: Forward 20 kg in steel braking area . stainless steel
Protection: lateral guard flywheel made of TPR and sheet, which prevents rust and corrosion caused by perspiration. Back protectors in ABS for stretching.
Bottom bracket axle: Double front bearing and rear large and fluted extra with bearing NTN.
Pedals: . Made of ABS-based porous rubber nonskid Handlebars: Ergonomic and coated porous, anti - allergic and easy to clean foam.
KETTLEBELLS K - Inventory for fitness
Article: kettlebells-k---inventory-for-fitness
Made in: EU
Model: K
Category: Inventory for fitness
Technicals Features:
4 to 6 - 8 to 10 - 12 to 14 - 16 to 20 - 24 to 28 - 32 kg
LADDER FUNCIONAL EF - Inventory for fitness
Article: ladder-funcional-ef---inventory-for-fitness
Made in: EU
Model: EF
Category: Inventory for fitness
Technicals Features:
6 meters
LIFTS SIDES E24 for fitness centers
Article: lifts-sides-e24-for-fitness-centers
Made in: EU
Model: E24
Category: Strength equipment
Technicals Features:
Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.
Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.
Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.
Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.
More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.