Swiss Timing The AVK group has become a member of IAKS
Send inquiry to project-manager

Sports equipment for beach soccer

Beach soccer goals

Beach soccer goals

Made in: EU

Model: S05020

Category: Equipment for beach sports

Technicals Features:
Pair of yellow colour aluminium beach soccer goals, round section 80 mm, dimensions 550x220 cm

Beach soccer goals, 5.50x2.20 m

Beach soccer goals, 5.50x2.20 m

Made in: EU

Model: 180

Category: Equipment for beach soccer

Technicals Features:
These goals are equipped with the special profiles 120 /100 mm of the soccer goals and a yellow powder coating. They correspond to the construction of the goals “For insertion into ground sockets”. The only differences are the goal size and the special ground sockets.
The ground sockets are simply dug in the sand.
We recommend to load the net with chains in the ground area.

Standard equipment: Yellow powder coated finish. Incl. net hoops and net hoop braces of aluminium tube, diameter 30 mm, Safety system net holders and special ground sockets – insertion depths 300 mm – with covers.

Stadium backrest shell seats A3 certificated by FIBA, UEFA /FIFA

Stadium backrest shell seats A3 certificated by FIBA, UEFA /FIFA

Made in: EU

Model: A3

Category: Tribune, seats

Technicals Features:
With double—wall backrest and 35 cm of backrest height, follows both UEFA and FIFA recommendations, for any kind of grandstand, specially for severe public use areas. Ergonomic backrest with lumbar space.

Seat moulded by injection in stabilized high quality copolymer polypropylene. Shiny surface. Sealed around their entire perimeter to prevent dirt from accumulating inside the seats, and in turn making it easy to clean. Counts with central drainage.

Stadium backrest shell seats CR3 certificated by FIBA, UEFA /FIFA

Stadium backrest shell seats CR3 certificated by FIBA, UEFA /FIFA

Made in: EU

Model: CR3

Category: Tribune, seats

Technicals Features:
With high backrest, follows the UEFA /FIFA recommendations, for conventional grandstands.

Seat moulded by injection in stabilized high quality copolymer polypropylene. Shiny surface. Sealed around their entire perimeter to prevent dirt from accumulating inside the seats, and in turn making it easy to clean. Counts with central drainage.

Stadium backrest shell seats CR4 certificated by FIBA, UEFA /FIFA

Stadium backrest shell seats CR4 certificated by FIBA, UEFA /FIFA

Made in: EU

Model: CR4

Category: Tribune, seats

Technicals Features:
With high backrest, follows the UEFA /FIFA recommendations, for any kind of grandstands.

Seat moulded by injection in stabilized high quality copolymer polypropylene. Shiny surface. Sealed around their entire perimeter to prevent dirt from accumulating inside the seats, and in turn making it easy to clean. Counts with central drainage.

Stadium backrest shell seats CR5 certificated by FIBA, UEFA /FIFA

Stadium backrest shell seats CR5 certificated by FIBA, UEFA /FIFA

Made in: EU

Model: CR5

Category: Tribune, seats

Technicals Features:
Monoblock seat with high backrest (35 cm), which is in line with the UEFA /FIFA recommendations for first class sports venues. It is been specially designed for narrow tread venues (depth seat over concrete: 31 cm), that must fit in small spaces, with a backrest seat.

Achieve the maximum comfort in the minimum amount of space. Aesthetically pleasing with
modern design, his backrest is lightly inclined and comes in an ergonomic form.

Seat moulded by injection in stabilized high quality copolymer polypropylene. Shiny surface. Sealed around their entire perimeter to prevent dirt from accumulating inside the seats, and in turn making it easy to clean. Counts with central drainage.

Stadium backrest shell seats CRM certificated by FIBA, UEFA /FIFA

Stadium backrest shell seats CRM certificated by FIBA, UEFA /FIFA

Made in: EU

Model: CRM

Category: Tribune, seats

Technicals Features:
With high backrest, follows the UEFA /FIFA recommendations, with smooth design, for usage in big venues or venues with narrow tread grandstands. Ergonomic and optionally with logo in backrest of seat.

Curved front edge of 35 mm with right—angle base overlapping terrace front. Central drainage. Ergonomical and modern shell seat with single wall high back with tubular air chambres, no—reinforcement nerves visible at back of seat, providing all the benefits of a double—back seat. Moulded by injection assisted by gas.

Optionally with logo in backrest of seat.

Stadium tip up seats AB certificated by FIBA

Stadium tip up seats AB certificated by FIBA

Made in: EU

Model: AB

Category: Tribune, seats

Technicals Features:
Tip up seat, designed for all kinds of usage (conventional bleachers, metallic and retractable bleachers, benches, etc, for sport facilities, VIP boxes, buildings that stage public shows, amphitheatres, auditoriums, etc.).

The seat tips up either by counterweight or by spring action, through the optional track limitator.
Reinforcement beams in the swinging conjoint are manufactured by the injection of a material formed of polymeric matrix reinforced with fibreglass, which brings resistance and comfort to the end product.

Chasis in steel profiles cold laminated S275, hot galvanised or cataphoretic coating, optional, oven painted.

Stadium tip up seats AC certificated by FIBA

Stadium tip up seats AC certificated by FIBA

Made in: EU

Model: AC

Category: Tribune, seats

Technicals Features:
Tip up seat for conventional stands in new projects or for upgrading existing installations specially the ones with narrow tread (reforms). Optimizes the available space at the sport venue, allows to fold itself occupying a minimum space. Possibility of a great number of complements, could be customized to our clients’ needs, for example, adding a publicity in the own seat.

— Seat and backrest with neat surface, to prevent dirt accumulation.
— The seat is tipping—up by spring action.
— Chassis in steel profiles cold laminated S275 and cataphoretic coating. Optional painted.
— The reinforcement beams in the seat and backrest shapes a special advertising space for adhesive ads.

Flooring tiles Solkit

Flooring tiles Solkit

Made in: EU

Model: Solkit

Category: Equipment for locker rooms, floorings

Technicals Features:
Meticulously produced using high—density virgin polyethylene, this top quality material allows us to offer a 10—year warranty under normal usage conditions. We offer two different options —either high—density PE (more rigid) or low—density PE (more flexible)— and a wide range of colours to address a host of different needs.

Dimensions: 50 x 50 x 2 cm.

Weight: 1.10 kg per tile

Equipment, approved by: