Water Polo Goals
Article: water-polo-goals
[article-2:]water-polo-goals\n
article: water-polo-goals
Made in: EUModel: Water Polo Goals
Category: Equipment for swimming and water polo
Technicals Features:
For Olympic and semi-Olympic competition pools there are a range of articles for water polo. Goals are made in lightweight material, for floating and resistance to lengthy immersion in the water. Among the swimming pool accessories, for this particular water sport, the company also offers the mobile bottoms made to measure to the customer’s specifications.
Another sports equipment from category
Article:stadium—seats—sr—s16m—su—trave—metallica—uefa—recommended—and—fiba—approved
Made in: EU
Model: SR—S16M on metallic beam
Category: Tribune, seats
Article: 3481.931
Main unit dimensions: 376 x 215 x 245mm w/o Connectors
Microphone dimensions: 118 x 25 x 80 mm. + 7 meter cable
E—GUN dimensions 280 x 35 x 140 mm + 7 meter cable
Alarm “low battery”: Yes, 4 levels indicated as battery symbol (Empty, Low, Medium, Full)
Protection class: IP41
Power: Built in 12 Volt / 7 Ah Sealed lead—acid battery
Standby time: 24 Hours (1000 starts). After this, the unit should still be operable for 1 hour.
The self—discharge time is approximately 12 months if not in use.
An external 12V Lead/Acid battery (car battery) connected to the charger input, could be used if extended operation time is needed.
Charger: Max. initial current: 1.0 Ah (only for use in dry environment).
Speakers: Load 3.2 — 16 Ohms
Output speakers: @13.2 Volts, 3.2 Ohms, 1 kHz Typical: 2 * 13 Watt with < 10 % Distortion Maximum: 2 * 19 Watts with 10 % Distortion
Storage temperature: —20ºC to +65ºC
Working temperature: —10ºC to +65ºC
Relative humidity: (20%—80%) without condensation
Manufacturer Swiss Timing (Switzerland)
Article:lockers—4—doors—mt4—for—gyms—swimmings—pools—and—wellness—areas
Made in: EU
Model: MT4
Category: Equipment for locker rooms