SKATE SHARPENING MACHINE SSM-2 (SSM-2 PRO)
Article: AVSM1002
Height: 320 mm (without holder and extractor tube)
Width: 250 mm (without holder and extractor tube)
Length: 350 mm (without holder and extractor tube)
Weight: 14.8 kg (without holder and extractor tube)
Power: 250 W
Voltage: 220-240 V
Frequency: AC (1-phase) 50-60 Hz
Revolutions per minute: 2800-3400 RPM
Grinding wheel type: Type S-2 from SSM
Grinding wheel dimensions:150 x 6 x 38 mm (diameter x thickness x arbor)
Diamond: For flat sharpening: SD-50, D-80 or SD-80
For hollow sharpening: D-80 or SD-80
Made in: EU
This portable high quality skate sharpener is intended to do the finishing sharpening (flat or hollow) on skates.
The main advantage of the SSM-2 is that it is very fast and easy to use while delivering great precision.
FAST - The design of the guide arm makes moving the skate very easy. Sharpen a skate in under a minute! SSM-2 vs. SSM-2 PRO - These machines use different models of the blade support device. The SSM-2 uses an adjustment screw to adjust the height of blade support roller. The SSM-2 PRO uses an exact scale which you can easily turn to correspond to the skate blade thickness (obtained from a separate measurement, or otherwise). Both devices have an incredible precision but the SRK PRO is much more convenient to use.
Another sports equipment from category
Article: AVSM1003
Weight: 34 kg.
Dimensions: 110 x 35 x 40 (cm)
Power: 250 watts
Voltage: 220 volts
Max RPM: 2800—3400 rpm
Sharpening disc: type S—4 from SSM (178 x 6 x 20 mm)
Diamond: SSM Type D—80
Article: AVSM1009
Tool Set is used when exchanging skate blades, removing tubular rivets and re—riveting tubular rivets and copper rivets.
Article: AVSM1011
Voltage: 1 phase 220—240 V 50—60 Hz, power — 250 W
Rotation Speed (Max.): 2800—3400 rpm
Dimensions (LxWxH) 720 x 320x 430 mm (including holder H8 and SM6 for undercutting the blade profile)
Machine weight: 23.2 kg (including holder H8 and SM6 for undercutting the blade profile)
Sharpening disc: Type S—2 from SSM, dimensions: 150 * 6 * 38 mm (diameter * thickness *axis)
Diamond: For groove: D—80 and for flat grinding: D—50, D—80 or D—2000