Sports equipment for fitness centers

Article: for-cross-area-accessories---rods-dominated-ca24

Made in: EU

Model: CA24

Category: Auxiliary equipment for gyms

Technicals Features:

Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.

Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.

Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).

Article: for-cross-area-accessories---shelf-rack-90-cm-ca38

Made in: EU

Model: CA38

Category: Auxiliary equipment for gyms

Technicals Features:

Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.

Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.

Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).

Article: for-cross-area-accessories---support-bar-ca31

Made in: EU

Model: CA31

Category: Auxiliary equipment for gyms

Technicals Features:

Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.

Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.

Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).

Article: for-cross-area-accessories---support-for-discs-ca30

Made in: EU

Model: CA30

Category: Auxiliary equipment for gyms

Technicals Features:

Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.

Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.

Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).

Article: for-cross-area-accessories---support-rods-ca28

Made in: EU

Model: CA28

Category: Auxiliary equipment for gyms

Technicals Features:

Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.

Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.

Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).

Article: for-cross-area-accessories---support-safety-bars-ca29

Made in: EU

Model: CA29

Category: Auxiliary equipment for gyms

Technicals Features:

Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.

Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.

Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).

Article: for-cross-area-accessories---trampolin-low-ca33

Made in: EU

Model: CA33

Category: Auxiliary equipment for gyms

Technicals Features:

Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.

Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.

Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).

Article: for-cross-area-accessories---trampolin-wall-ca32

Made in: EU

Model: CA32

Category: Auxiliary equipment for gyms

Technicals Features:

Structure: steel tube 110 x 52 mm, with a thickness of 3 mm, laser cut for precision and welded by robotized process.

Painting: Treatment of 3 - layer cleaning steel pressure jet, mechanical review with abrasive paper for thorough cleaning, anticorrosion primer and electrostatic double layer of epoxy paint pure polyester powder, dried at 240 ° C.

Welding: Perimeter closed structural points and tie plates. 10mm for proper backlash or twisting movement caused by the use and load Accessories: Coating slip rubber grip for safety and (step). Neoprene anti - allergic and anti - slip finish in solid aluminum (funds).

Article: funds-and-abdominal-eb10-for-fitness-centers

Made in: EU

Model: EB10

Category: Fitness benches, racks, free weights

Technicals Features:

Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.

Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.

Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.

Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.

More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.

Article: funds-and-assisted-controlled-e13-for-fitness-centers

Made in: EU

Model: E13

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.

Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.

Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.

Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.

More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.