Sports equipment for fitness at fitness centers

Article: remo-low-e12-for-fitness-centers

Made in: EU

Model: E12

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.

Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.

Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.

Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.

More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.

Article: remo-seated-e15-for-fitness-centers

Made in: EU

Model: E15

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.

Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.

Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.

Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.

More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.

Article: remo-sr07-for-fitness-centers

Made in: EU

Model: SR07

Category: Strength equipment

Technicals Features:

Chassis: Steel tube 110 x 52 mm, with a thickness of 3 mm.

Soldado according UNE EN 10219, quality S-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process using 4 - roller system, avoiding deformation in the process, keeping its physical characteristics throughout the piece.

Painting: 50 microns epoxy primer. Surface finish with two component epoxy paint 90 microns, with high antioxidant level moisture and sweating. High quality pigment, with high gloss finish used in automotive. Tunnel painted painting and drying at 60 °.

Article: roll-foam-fr35---inventory-for-fitness

Made in: EU

Model: FR35

Category: Inventory for fitness

Technicals Features:

90 x 15 x 15 cm

Article: rope-battle-br---inventory-for-fitness

Made in: EU

Model: BR

Category: Inventory for fitness

Technicals Features:

Article: rope-pulling-biceps-triceps-bt57064

Made in: EU

Model: BT57064

Category: Fitness benches, racks, free weights

Technicals Features:

Article: rope-stretch-pt---inventory-for-fitness

Made in: EU

Model: PT

Category: Inventory for fitness

Technicals Features:

3 Densities: Medium, High, Strong

Article: rope-tration-bt57066

Made in: EU

Model: BT57066

Category: Fitness benches, racks, free weights

Technicals Features:

Article: set-of-fitness-pump-fps---inventory-for-fitness

Made in: EU

Model: FPS

Category: Inventory for fitness

Technicals Features:

1 stick, 2 caps, 2 disks 1.25 kg, 2.5 kg 2 discs and 2 discs of 5 kg

Article: squat-and-twin-e50-for-fitness-centers

Made in: EU

Model: E50

Category: Strength equipment

Technicals Features:

Transmission: Steel cable 6 mm thick coated PVC with a resistance of up to 900 kg.

Guides: Calibrated carbon steel and treatment dual chrome hardened for better sliding weight plates.

Structure: Steel pipe 3 mm high strength, laser cut for precision, and welded by robotized process.

Padding: simile leather high density, resistant to perspiration, anti - allergenic and antebacteriano, with double padding on models with an area of use.

More intense paint process: Steel pickling and stabilized by immersion of the parts in different desengransantes solutions to ensure a perfect and complete cleaning of the base material. Antioxidant to ensure adequate isolation of internal oxidation and good paint adhesion primer. 2 final coats of epoxy polyester powder paint, dried at 240 ° C.