Swiss Timing The AVK group has become a member of IAKS
Send inquiry to project-manager


Haspo (Germany) - manufacturer equipment of aluminum for team sports.

Badminton posts Standard - acc. to EN 1509 (test class C)

Badminton posts Standard - acc. to EN 1509 (test class C)

Made in: EU

Model: 520

Category: Equipment for badminton

Technicals Features:
An alternative solution to the “freestanding badminton posts” which has already gained recognition, since floor sockets for tennis and volleyball are provided at most indoor courts.

Standard equipment: Matt silver anodised finish.
Incl. rust—resistant net and tensioning hooks and ground sockets – insertion depth 350 mm – with covers

Add to your inquiry to the project manager
Badminton posts with internal tension mechanism - acc. to EN 1509 (test class C)

Badminton posts with internal tension mechanism - acc. to EN 1509 (test class C)

Made in: EU

Model:
Cat.—no. 550: square, 80x80 mm
Cat.—no. 552: round, 83 mm diameter

Category: Equipment for badminton

Technicals Features:
These badminton posts with internal tension mechanism are available of square profile 80x80 mm or round profile with 83 mm diameter.
The tensioning upright is equipped with the same tension mechanism as of the tennis posts of Cat.—no. 500/502 so that the mechanism is protected against external influences.
Easy and quick tensioning and loosening of net tension by use of a special spindle.
Net and rope are durable as no roll up of the net rope.
The crank is inserted in the head of the posts and therefore always ready to hand.
Aluminium coating mould parts as covers.

Standard equipment: Matt silver anodised finish. Incl. rustproof fixing hooks and sable ground sockets – insertion depth 350 mm – with covers

Add to your inquiry to the project manager
Basketball unit for practice - acc. to EN 1270

Basketball unit for practice - acc. to EN 1270

Made in: EU

Model: 703

Category: Equipment for basketball

Technicals Features:
Equipment specially developed for practice purposes and chiefly used in school yards, playgrounds, and open—air swimming pools. This equipment is also made of espesially thick—walled special aluminium alloy 80x80 mm sqare profiles and is therefore extremely stable – and the basket height meets competition requirements.
— special wedges prevent equipment wavering in especially stable ground sockets
— the back boards are mounted on a solid aluminium rear structure fitted directly to the upright
— easy and quick assembly
— glass—fibre back boards measuring 120x90 cm – absolutely weatherproof. Scratch— and impact—resistant finish

Standard equipment: Natural bright aluminium finish

Basket height 3050 mm
TÜV in combination with the protective cushions of Cat.—no. 5172

Incl. back board mountings, glass—fibre back boards with baskets coloured orange, net coloured white, ground sockets – insertion depth 500 mm – with cover and special wedges

Add to your inquiry to the project manager
Basketball unit for Street basketball - acc. to EN 1270

Basketball unit for Street basketball - acc. to EN 1270

Made in: EU

Model:
Cat.—no. 705: basket height 3050 mm
Cat.—no. 7051: basket height 2600 mm

Category: Equipment for basketball

Technicals Features:
This is a real alternative to the basketball practice unit of Cat.—no. 703 even considering the price.
The new back boards, also made of glass—fibre, together with the upright forming a knee give the unit an up—to—date design.
The upright is also made of special thick—walled aluminium square profiles 80x80 mm. This construction, however, is forming a knee and therefore has a total overhang of 650 mm.
The connection from basket to back board construction is execute acc. to CEN—Norm.

The basket height meets competition requirements. Special wedges prevent the equipment wavering in special stable ground sockets.
Easy and quick assembly. Glass fibre back boards of 100x75 cm, absolutely weatherproof, scratch— and impact—resistant finish.

Standard equipment: Natural bright aluminium finish.
Incl. back board mountings, back boards of glass—fibre with baskets coloured orange and nets coloured white, ground
sockets – insertion depth 500 mm – with covers and special wedges

Add to your inquiry to the project manager
Basketball unit Mobile

Basketball unit Mobile

Made in: EU

Model: 704

Category: Equipment for basketball

Technicals Features:
“Mobile unit” meets competition requirements. Absolutely maintenancefree.
Extremely stable construction due to special system profiles. Side frames and boom are supplied as complete welded structures, whereby a special joint system assures simple assembly. Plus enormous freight cost savings compared with one—piece units. The connection from basket to back board construction is execute acc. to CEN—Norm.

Complete Unit:
Total overhang 1650 mm, incl. all necessary accessories, glass—fibre back boards with baskets coloured orange and nets coloured white, safety hoops for counterweights, but without counterweights.
Three rollers are fitted to each unit. The unit stands on two rear support rollers and two front feet. The height of the front jockey roller can be adjusted as required.
Counterweights are necessary, i. e. totally 8 weights 1x0.25x0.05m with 25 kg each. An appropriate holder is built in for this purpose. To prevent the counterweights from being stolen, safety hoops are provided.
Glas—fibre back boards – measuring 180x105 cm – absolutely weatherproof, scratch— and impact—resitant finish.
Standard equipment: Natural bright aluminium finish.

Add to your inquiry to the project manager
Basketball unit, single-upright construction - acc. to EN 1270

Basketball unit, single-upright construction - acc. to EN 1270

Made in: EU

Model: 700

Category: Equipment for basketball

Technicals Features:
Rugged, functional single upright construction made of 90x5 mm special aluminium alloy tubing. Through a bracing additionally arranged on the tubes and a reinforcd base to prevent bending of the upright, especially steady and torsion resistant performance is assured.
To prevent unit distorsion, the ground sockets – total length 600 mm, insertion depth 450 mm – are provided with a cross—pin. Appropriate slots are available at the upright end.
— Special wedges prevent wavering of uprights in the ground sockets. Additional cross beams from back board fixing to upright acc. to CEN—Norm
— stable rear structure as back board mounting made of thickwalled aluminium profiles. Additional bracing of back board mounting to upright
— glass—fibre back board – measuring 180x105 cm – absolutely weather—proof, scratch— and impact—resistant finish

Standard equipment: Natural bright aluminium finish

Basket height 3050 mm
Total overhang 1650 mm
TÜV in connection with the Protection cushions of Cat.—no. 5173.

Add to your inquiry to the project manager
Beach handball goals, 3x2 m

Beach handball goals, 3x2 m

Made in: EU

Model: 280

Category: Equipment for beach handball

Technicals Features:
Goal frame of special aluminium profile 80x80 mm with yellow powder coated finish. Inside dimensions 3x2 m.
Same construction as of beach soccer goals.

Standard equipment: Yellow powder coated finish. Incl. net hoops and net hoop braces of aluminium tube, diameter 30 mm, Safety system net holders and special ground sockets – insertion depths 300 mm – with covers.

Add to your inquiry to the project manager
Beach soccer goals, 5.50x2.20 m

Beach soccer goals, 5.50x2.20 m

Made in: EU

Model: 180

Category: Equipment for beach soccer

Technicals Features:
These goals are equipped with the special profiles 120 /100 mm of the soccer goals and a yellow powder coating. They correspond to the construction of the goals “For insertion into ground sockets”. The only differences are the goal size and the special ground sockets.
The ground sockets are simply dug in the sand.
We recommend to load the net with chains in the ground area.

Standard equipment: Yellow powder coated finish. Incl. net hoops and net hoop braces of aluminium tube, diameter 30 mm, Safety system net holders and special ground sockets – insertion depths 300 mm – with covers.

Add to your inquiry to the project manager
Beach volleyball competition unit with pulley tensioning device - acc. to EN 1271

Beach volleyball competition unit with pulley tensioning device - acc. to EN 1271

Made in: EU

Model:

Category: Equipment for volleyball

Technicals Features:
This posts are the same as of Cat.—no. 518/5184. The only difference is the tensioning device.

Cat.—no. 5183: Volleyball posts – round 83 mm diameter, anodised finish
TÜV in connection with the Special ground sockets of Cat.—no. 5182.

Cat.—no. 51842: Volleyball posts – round 83 mm diameter, yellow powder coated finish
TÜV in connection with the Special ground sockets of Cat.—no. 5182.

Add to your inquiry to the project manager
Beach volleyball competition unit with pulley tensioning device - acc. to EN 1271 and DVV Beach 2

Beach volleyball competition unit with pulley tensioning device - acc. to EN 1271 and DVV Beach 2

Made in: EU

Model: 5301

Category: Equipment for volleyball

Technicals Features:
The posts for this system are made of extremely stable aluminium special profiles 80x80 mm and have the same construction as the volleyball posts in Cat.—no. 5132
The pulley tensioning device guarantees a quick tensioning and release of the net and ensures a continuously adjustable net
height.
This system complies with TÜV and DVV. It has received the label of DVV Beach 2.

Cat.—no. 5193: Beach volleyball competition unit Beach 2, square 80x80 mm, heigth of post above ground 2650 mm, without ground
sockets, matt silver anodised finish.
TÜV in connection with the Special ground sockets of Cat.—no. 5192.

Cat.—no. 51942: Beach volleyball competition unit Beach 2, square 80x80 mm, heigth of post above ground 2650 mm, without ground
sockets, yellow powder coated finish.
TÜV in connection with the Special ground sockets of Cat.—no. 5192.

Cat.—no. 5191: Special ground sockets of galvanized steel, inclined execution, to be fastened on concrete foundation, length of ground socket
360 mm – insertion depth 350 mm – with cover.

Cat.—no. 5192: Special ground sockets of galvanized steel to be set in concrete, length of ground socket 700 mm – insertion depth 350 mm, with
cover.

Add to your inquiry to the project manager
Equipment, approved by: