<p>AVK Group</p> <p>The AVK group has become a member of IAKS</p> Member of International Association for Sports and Leisure Facilities
EQUIPMENT OF SPORTS FACILITIES
Since 2009
@ e-mail: office@avkgroup.at
📞 Tel: +43 1 890 05 82
Send inquiry to project-manager

Swimming pools

Supply and installation of sports and technological equipment, timing and refereeing systems, scoreboards, video screens

Official representative 'Swiss Timing' 'Seicom' 'Malmsten' 'Sportsystem'

5 Station pulley cross over

Article: AVTJ3010

Long. 4689 mm.

Wide. 2276 mm.

Height: 2335 mm.

Weight: 770 Kg

Main frame: Steel tube of 120x50x2mm OVAL. and 100x50x2 mm.

Pictogram instructions included.
Label Warning signs and safety of use.
Needle selection of the weights of aluminum magnet to prevent falling when
performing the exercises and spiral wire to prevent their loss.
Cable traction weights: Steel in a 7x19 configuration with 3 +1 mm. in diameter and coated with polyamide to 4 mm. with a breaking strength of 560 K.
Pulleys: Made of polypropylene, double sealed bearings and precision ground
to ensure long life of the cables, smooth movement and maximum durability.
Fairings: Cowl of the towers where the weights on ABS to improve the appearance and increase safety.
Safety: Machine manufactured under UNE-EN 957.1 and 957.10
Plates or weights, gauge steel, polyamide caps have a smoother operation and avoid noise in the exercise.
Charge: high pulley with 100 K. Low pulley with 100 K. Biceps / Triceps 80 K. and two outputs for crossing 80 +80 K.
Seats: Made of high density foam (150) with a thickness of 4 cm. upholstered with flame retardant skay.
The supports are placed where the feet are covered RILSAN 2 mm. thick
The grips are nonallergic and non-slip.
Painting: Metal parts undergo degreasing and phosphate tunnel, then passes through an electrostatic paint booth and painted with polyester powder paint. Passed through an oven for curing at 220°.
Regulations chrome.
Made in EU.

Add to your inquiry to the project manager

Another sports equipment from category

Pec press/shoulders Pec press/shoulders

Article:AVSA1021
Material: 3 mm reinforced steel
Dimensions: 187 x 147 x 157 cm
Color: Black, grey
Workload: 100 kg
Purpose: training

Leg extension and leg curl Leg extension and leg curl

Article: AVTJ3027
Length: 1638 mm.
Width: 1070 mm.
Height: 1505 mm.
Weight: 175 kg.
Main frame: Steel tube of 120x50x2mm OVAL. and 100x50x2 mm.

Adductor-Abductor-Gluteus Adductor-Abductor-Gluteus

Article: AVTJ3026
Length: 1675 mm.
Width: 1133 mm.
Height. 1505 mm.
Weight: 330 Kg
Main frame: Steel tube of 120x50x2mm OVAL. and 100x50x2 mm.

Trade marks