Swiss Timing The AVK group has become a member of IAKS
Send inquiry to project-manager

Sports equipment for weightlifting and powerlifting at weightlifting halls: tribunes and seats

Metallic dismountable bleachers (benches) for sports HC80-40

Metallic dismountable bleachers (benches) for sports HC80-40

Made in: EU

Model: HC80—40

Category: Tribune, seats

Technicals Features:
Dismountable metallic bleacher, recommended for temporal or permanent installations outdoor or indoor. Recommended for events with large audience capacity. Its inclination optimizes the wiewing angle of the spectator. Very solid bleacher according to Spanish and European regulations.

Metallic structure (frame, pillars, safety railings and trussers) made of steel profiles cold laminated S275, hot galvanised at 450 ºC. Platforms and stairs of polypropylene frame, anti—slippery with slots, easy cleaning.
All bleachers have safety railings and a base at the pillars with adjustable height, in order to compensate differences in floor level of up to 200 mm.

Stairs modules have an additional step to facilitate the access to the bleacher.

Stadium backrest shell seats A3 certificated by FIBA, UEFA /FIFA

Stadium backrest shell seats A3 certificated by FIBA, UEFA /FIFA

Made in: EU

Model: A3

Category: Tribune, seats

Technicals Features:
With double—wall backrest and 35 cm of backrest height, follows both UEFA and FIFA recommendations, for any kind of grandstand, specially for severe public use areas. Ergonomic backrest with lumbar space.

Seat moulded by injection in stabilized high quality copolymer polypropylene. Shiny surface. Sealed around their entire perimeter to prevent dirt from accumulating inside the seats, and in turn making it easy to clean. Counts with central drainage.

Stadium backrest shell seats CR4 certificated by FIBA, UEFA /FIFA

Stadium backrest shell seats CR4 certificated by FIBA, UEFA /FIFA

Made in: EU

Model: CR4

Category: Tribune, seats

Technicals Features:
With high backrest, follows the UEFA /FIFA recommendations, for any kind of grandstands.

Seat moulded by injection in stabilized high quality copolymer polypropylene. Shiny surface. Sealed around their entire perimeter to prevent dirt from accumulating inside the seats, and in turn making it easy to clean. Counts with central drainage.

Stadium backrest shell seats CR5 certificated by FIBA, UEFA /FIFA

Stadium backrest shell seats CR5 certificated by FIBA, UEFA /FIFA

Made in: EU

Model: CR5

Category: Tribune, seats

Technicals Features:
Monoblock seat with high backrest (35 cm), which is in line with the UEFA /FIFA recommendations for first class sports venues. It is been specially designed for narrow tread venues (depth seat over concrete: 31 cm), that must fit in small spaces, with a backrest seat.

Achieve the maximum comfort in the minimum amount of space. Aesthetically pleasing with
modern design, his backrest is lightly inclined and comes in an ergonomic form.

Seat moulded by injection in stabilized high quality copolymer polypropylene. Shiny surface. Sealed around their entire perimeter to prevent dirt from accumulating inside the seats, and in turn making it easy to clean. Counts with central drainage.

Stadium backrest shell seats CRM certificated by FIBA, UEFA /FIFA

Stadium backrest shell seats CRM certificated by FIBA, UEFA /FIFA

Made in: EU

Model: CRM

Category: Tribune, seats

Technicals Features:
With high backrest, follows the UEFA /FIFA recommendations, with smooth design, for usage in big venues or venues with narrow tread grandstands. Ergonomic and optionally with logo in backrest of seat.

Curved front edge of 35 mm with right—angle base overlapping terrace front. Central drainage. Ergonomical and modern shell seat with single wall high back with tubular air chambres, no—reinforcement nerves visible at back of seat, providing all the benefits of a double—back seat. Moulded by injection assisted by gas.

Optionally with logo in backrest of seat.

Stadium seats FRONTE GRADONE - FIBA FIFA UEFA approved

Stadium seats FRONTE GRADONE - FIBA FIFA UEFA approved

Made in: EU

Model: FRONTE GRADONE

Category: Tribune, seats

Technicals Features:
The design of the riser mounted polyamide bracket fi rst started to give an alternative or even replace the metal structure to support the seat, in fact, the polyamide fi ber glass has the characteristic of being corrosionproof and extremely durable. Its versatility allows it to be compatible with all seats, the simple and clean profi le matches perfectly with any seat.

OVERALL DIMENSIONS
Depth 310 mm; width 340 mm.
MATERIAL
Polyamide fiber glass; injection moulded.
INSTALLATION
Directly on step riser.
FIXING
3 — 4 fixing points if installed on step riser. There are numerous transversal stiffening ribs that makes the model extremely antivandal.

Stadium seats M2002 SESTA - FIBA FIFA UEFA approved

Stadium seats M2002 SESTA - FIBA FIFA UEFA approved

Made in: EU

Model: M2002 SESTA

Category: Tribune, seats

Technicals Features:
Double high back seat, dimensionally complying with the recommendations of FIFA/UEFA/FIBA. The generous seat depth allows the user to enjoy the sporting event in total comfort, without sacrificing strength and durability thanks to the double back and the 3 fixing points.

OVERALL DIMENSIONS
Height 330 mm; depth 400 mm; width 430 mm.
MATERIAL
Polypropylene (PP) or polyamide (PA); injection moulded.
INSTALLATION
Directly on concrete step, on riser mounted polyamide or metallic bracket, on metal beam 2—3—4—5 seats.
FIXING
Provides from 1 to 3 fixing points; the numerous ribs inside the double back and the increased thickness reduce to the minimum the risk of vandalism. Eventually available the central fixing device which grants an increased strength and prevents risks of leverage from the rear.

Stadium seats M2002 SESTA metallic console - FIBA FIFA UEFA approved

Stadium seats M2002 SESTA metallic console - FIBA FIFA UEFA approved

Made in: EU

Model: M2002 SESTA metallic console

Category: Tribune, seats

Technicals Features:
Double high back seat, dimensionally complying with the recommendations of FIFA/UEFA/FIBA. The generous seat depth allows the user to enjoy the sporting event in total comfort, without sacrificing strength and durability thanks to the double back and the 3 fixing points.

OVERALL DIMENSIONS
Height 330 mm; depth 400 mm; width 430 mm.
MATERIAL
Polypropylene (PP) or polyamide (PA); injection moulded.
INSTALLATION
Directly on concrete step, on riser mounted polyamide or metallic bracket, on metal beam 2—3—4—5 seats.
FIXING
Provides from 1 to 3 fixing points; the numerous ribs inside the double back and the increased thickness reduce to the minimum the risk of vandalism. Eventually available the central fixing device which grants an increased strength and prevents risks of leverage from the rear.

Stadium seats M2002 SESTA on metallic riser - FIBA FIFA UEFA approved

Stadium seats M2002 SESTA on metallic riser - FIBA FIFA UEFA approved

Made in: EU

Model: M2002 SESTA on metallic riser

Category: Tribune, seats

Technicals Features:
Double high back seat, dimensionally complying with the recommendations of FIFA/UEFA/FIBA. The generous seat depth allows the user to enjoy the sporting event in total comfort, without sacrificing strength and durability thanks to the double back and the 3 fixing points.

OVERALL DIMENSIONS
Height 330 mm; depth 400 mm; width 430 mm.
MATERIAL
Polypropylene (PP) or polyamide (PA); injection moulded.
INSTALLATION
Directly on concrete step, on riser mounted polyamide or metallic bracket, on metal beam 2—3—4—5 seats.
FIXING
Provides from 1 to 3 fixing points; the numerous ribs inside the double back and the increased thickness reduce to the minimum the risk of vandalism. Eventually available the central fixing device which grants an increased strength and prevents risks of leverage from the rear.

Stadium seats M2002 SESTA single stand - FIBA FIFA UEFA approved

Stadium seats M2002 SESTA single stand - FIBA FIFA UEFA approved

Made in: EU

Model: M2002 SESTA single stand

Category: Tribune, seats

Technicals Features:
Double high back seat, dimensionally complying with the recommendations of FIFA/UEFA/FIBA. The generous seat depth allows the user to enjoy the sporting event in total comfort, without sacrificing strength and durability thanks to the double back and the 3 fixing points.

OVERALL DIMENSIONS
Height 330 mm; depth 400 mm; width 430 mm.
MATERIAL
Polypropylene (PP) or polyamide (PA); injection moulded.
INSTALLATION
Directly on concrete step, on riser mounted polyamide or metallic bracket, on metal beam 2—3—4—5 seats.
FIXING
Provides from 1 to 3 fixing points; the numerous ribs inside the double back and the increased thickness reduce to the minimum the risk of vandalism. Eventually available the central fixing device which grants an increased strength and prevents risks of leverage from the rear.

Equipment, approved by: